NAME
lpc21isp - Is an in-circuit programming (ISP) tool for the NXP(Philips) microcontrollers
SYNOPSIS
lpc21isp [[Options]] [file[ file[ ...]]] [comport] [baudrate] [Oscillator_in_kHz]
lpc21isp [-bin] [-hex] [-term] [-termonly] [-localecho] [-detectonly] [-debug0] [-debug3] [-debug5] [-donotstart] [-try<n>] [-wipe] [-control] [-controlswap] [-controlinv] [-verify] [-logfile] [-halfduplex] [-ADARM] [-PHILIPSARM]
DESCRIPTION
lpc21isp is an in-circuit programming (ISP) tool for the NXP(Philips) LPC1100/LPC1300/LPC1700/LPC2000 series ARM7/Cortex-M0/Cortex-M3 microcontrollers.
OPTIONS
- -bin
-
for uploading binary file
- -hex
-
for uploading file in intel hex format (default)
- -term
-
for starting terminal after upload
- -termonly
-
for starting terminal without an upload
- -localecho
-
for local echo in terminal
- -detectonly
-
detect only used LPC chiptype (PHILIPSARM only)
- -debug0
-
for no debug
- -debug3
-
for progress info only
- -debug5
-
for full debug
- -donotstart
-
do not start MCU after download
- -try<n>
-
try n times to synchronise
- -wipe
-
Erase entire device before upload
- -control
-
for controlling RS232 lines for easier booting (Reset = DTR, EnableBootLoader = RTS)
- -controlswap
-
swap RS232 control lines (Reset = RTS, EnableBootLoader = DTR)
- -controlinv
-
Invert state of RTS & DTR (0=true/assert/set, 1=false/deassert/clear).
- -verify
-
Verify the data in Flash after every writes to sector. To detect errors in writing to Flash ROM
- -logfile
-
for enabling logging of terminal output to lpc21isp.log
- -halfduplex
-
use halfduplex serial communication (i.e. with K-Line)
- -ADARM
-
for downloading to an Analog Devices ARM microcontroller ADUC70xx
- -PHILIPSARM
-
for downloading to a microcontroller from NXP(Philips) LPC13xx/LPC17xx/LPC2000 family (default)