---
name: "llvm-objdump-17"
section: "1"
platform: "linux"
package: "llvm-17"
version: "1:17.0.6-22+b2"
release: "Debian 13 (Trixie)"
platforms: ["linux"]
url: "https://new.carta.tech/llvm-objdump-17"
---
# llvm-objdump-17(1)
manual page for llvm-objdump 17
## NAME
llvm-objdump - manual page for llvm-objdump 17
## DESCRIPTION
OVERVIEW: llvm object file dumper
USAGE: llvm-objdump \[options\] \
### OPTIONS:
- **--adjust-vma**=*offset*
Increase the displayed address by the specified offset
- **--all-headers**
Display all available header information, relocation entries and the symbol table
- **--arch-name=**\
Target arch to disassemble for, see **--version** for available targets
- **--archive-headers**
Display archive header information
- **-a**
Alias for **--archive-headers**
- **--build-id=**\
Build ID to look up. Once found, added as an input file
- **-C**
Alias for **--demangle**
- **--debug-file-directory=**\
Path to directory where to look for debug files
- **--debug-vars-indent=**\
Distance to indent the source-level variable display, relative to the start of the disassembly
- **--debug-vars=**\
Print the locations (in registers or memory) of source-level variables alongside disassembly. Supported formats: ascii, unicode (default)
- **--debuginfod**
Use debuginfod to find debug files
- **--demangle**
Demangle symbol names
- **--disassemble-all**
Disassemble all sections found in the input files
- **--disassemble-symbols=**\
List of symbols to disassemble. Accept demangled names when **--demangle** is specified, otherwise accept mangled names
- **--disassemble-zeroes**
Do not skip blocks of zeroes when disassembling
- **--disassembler-options**=*options*
Pass target specific disassembler options
- **--disassemble**
Disassemble all executable sections found in the input files
- **--dwarf=**\
Dump the specified DWARF debug sections. The only supported value is 'frames'
- **--dynamic-reloc**
Display the dynamic relocation entries in the file
- **--dynamic-syms**
Display the contents of the dynamic symbol table
- **-D**
Alias for **--disassemble-all**
- **-d**
Alias for **--disassemble**
- **--fault-map-section**
Display the content of the fault map section
- **--file-headers**
Display the contents of the overall file header
- **--full-contents**
Display the content of each section
- **-f**
Alias for **--file-headers**
- **--headers**
Alias for **--section-headers**
- **--help**
Display available options (**--help-hidden** for more)
- **-h**
Alias for **--section-headers**
- **-j** \
Alias for **--section**
- **--line-numbers**
When disassembling, display source line numbers. Implies **--disassemble**
- **-l**
Alias for **--line-numbers**
- **--macho**
Use MachO specific object file parser
- **--mattr**=*a1*,+a2,-a3,...
Target specific attributes (**--mattr**=*help* for details)
- **--mcpu**=*cpu-name*
Target a specific cpu type (**--mcpu**=*help* for details)
- **-M** \
Alias for **--disassembler-options=**
- **-m**
Alias for **--macho**
- **--no-addresses**
Alias for **--no-leading-addr**
- **--no-debuginfod**
Don't use debuginfod to find debug files
- **--no-leading-addr**
When disassembling, do not print leading addresses for instructions or inline relocations
- **--no-print-imm-hex**
Do not use hex format for immediate values
- **--no-show-raw-insn**
When disassembling instructions, do not print the instruction bytes.
- **--offloading**
Display the content of the offloading section
- **--prefix-strip**=*prefix*
Strip out initial directories from absolute paths. No effect without **--prefix**
- **--prefix**=*prefix*
Add prefix to absolute paths
- **--print-imm-hex**
Use hex format for immediate values (default)
- **--private-headers**
Display format specific file headers
- **-p**
Alias for **--private-headers**
- **--raw-clang-ast**
Dump the raw binary contents of the clang AST section
- **--reloc**
Display the relocation entries in the file
- **-R**
Alias for **--dynamic-reloc**
- **-r**
Alias for **--reloc**
- **--section-headers**
Display summaries of the headers for each section.
- **--section=**\
Operate on the specified sections only. With **--macho** dump segment,section
- **--show-all-symbols**
Show all symbols during disassembly, even if multiple symbols are defined at the same location
- **--show-lma**
Display LMA column when dumping ELF section headers
- **--source**
When disassembling, display source interleaved with the disassembly. Implies **--disassemble**
**--start-address**=*address* Set the start address for disassembling, printing relocations and printing symbols
- **--stop-address**=*address*
Set the stop address for disassembling, printing relocations and printing symbols
- **--symbol-description**
Add symbol description for disassembly. This option is for XCOFF files only
- **--symbolize-operands**
Symbolize instruction operands when disassembling
- **--syms**
Display the symbol table
- **-S**
Alias for **--source**
- **-s**
Alias for **--full-contents**
- **--traceback-table**
Decode traceback table in disassembly. Implies **--disassemble**. This option is for XCOFF files only
- **--triple=**\
Target triple to disassemble for, see **--version** for available targets
- **-T**
Alias for **--dynamic-syms**
- **-t**
Alias for **--syms**
- **--unwind-info**
Display unwind information
- **-u**
Alias for **--unwind-info**
- **--version**
Display the version of this program
- **-v**
Alias for **--version**
- **--wide**
Ignored for compatibility with GNU objdump
- **--x86-asm-syntax**=*att*
Emit AT&T-style disassembly
- **--x86-asm-syntax**=*intel*
Emit Intel-style disassembly
- **-x**
Alias for **--all-headers**
- **-z**
Alias for **--disassemble-zeroes**
### llvm-objdump MachO Specific Options:
- **--arch=**\
architecture(s) from a Mach-O file to dump
- **--archive-member-offsets**
Print the offset to each archive member for Mach-O archives (requires **--macho** and **--archive-headers**)
- **--bind**
Display mach-o binding info
- **--chained-fixups**
Print chained fixup information (requires **--macho**)
- **--data-in-code**
Print the data in code table for Mach-O objects (requires **--macho**)
- **--dis-symname** \
disassemble just this symbol's instructions (requires **--macho**)
- **--dsym=**\
Use .dSYM file for debug info
- **--dyld-info**
Print bind and rebase information used by dyld to resolve external references in a final linked binary (requires **--macho**)
- **--dylib-id**
Print the shared library's id for the dylib Mach-O file (requires **--macho**)
- **--dylibs-used**
Print the shared libraries used for linked Mach-O files (requires **--macho**)
- **--exports-trie**
Display mach-o exported symbols
- **--full-leading-addr**
Print full leading address
- **--function-starts=**\
Print the function starts table for Mach-O objects. Options: addrs (default), names, both (requires **--macho**)
- **-g**
Print line information from debug info if available
- **--indirect-symbols**
Print indirect symbol table for Mach-O objects (requires **--macho**)
- **--info-plist**
Print the info plist section as strings for Mach-O objects (requires **--macho**)
- **--lazy-bind**
Display mach-o lazy binding info
- **--link-opt-hints**
Print the linker optimization hints for Mach-O objects (requires **--macho**)
- **--no-leading-headers**
Print no leading headers
**--no-symbolic-operands** do not symbolic operands when disassembling (requires **--macho**)
- **--non-verbose**
Print the info for Mach-O objects in non-verbose or numeric form (requires **--macho**)
- **--objc-meta-data**
Print the Objective-C runtime meta data for Mach-O files (requires **--macho**)
- **--private-header**
Display only the first format specific file header
- **--rebase**
Display mach-o rebasing info
- **--rpaths**
Print the runtime search paths for the Mach-O file (requires **--macho**)
- **--universal-headers**
Print Mach-O universal headers (requires **--macho**)
- **--weak-bind**
Display mach-o weak binding info
Pass @FILE as argument to read options from FILE.