--- name: "libressl-BIO_s_bio" section: "3" platform: "linux" package: "libressl" version: "4.4.0-1" release: "Arch Linux 2026-11-01" platforms: ["linux"] url: "https://new.carta.tech/libressl-BIO_s_bio" --- # libressl-BIO\_s\_bio(3) BIO pair BIO ## NAME **BIO\_s\_bio**, **BIO\_make\_bio\_pair**, **BIO\_destroy\_bio\_pair**, **BIO\_shutdown\_wr**, **BIO\_set\_write\_buf\_size**, **BIO\_get\_write\_buf\_size**, **BIO\_new\_bio\_pair**, **BIO\_get\_write\_guarantee**, **BIO\_ctrl\_get\_write\_guarantee**, **BIO\_get\_read\_request**, **BIO\_ctrl\_get\_read\_request**, **BIO\_ctrl\_reset\_read\_request** – BIO pair BIO ## SYNOPSIS Crypto Library (libcrypto, -lcrypto) **#include \** *const* *BIO\_METHOD* *\**\ **BIO\_s\_bio**(*void*); *int*\ **BIO\_make\_bio\_pair**(*BIO \*b1*, *BIO \*b2*); *int*\ **BIO\_destroy\_bio\_pair**(*BIO \*b*); *int*\ **BIO\_shutdown\_wr**(*BIO \*b*); *int*\ **BIO\_set\_write\_buf\_size**(*BIO \*b*, *long size*); *size\_t*\ **BIO\_get\_write\_buf\_size**(*BIO \*b*, *long size*); *int*\ **BIO\_new\_bio\_pair**(*BIO \*\*bio1*, *size\_t writebuf1*, *BIO \*\*bio2*, *size\_t writebuf2*); *int*\ **BIO\_get\_write\_guarantee**(*BIO \*b*); *size\_t*\ **BIO\_ctrl\_get\_write\_guarantee**(*BIO \*b*); *int*\ **BIO\_get\_read\_request**(*BIO \*b*); *size\_t*\ **BIO\_ctrl\_get\_read\_request**(*BIO \*b*); *int*\ **BIO\_ctrl\_reset\_read\_request**(*BIO \*b*); ## DESCRIPTION **BIO\_s\_bio**() returns the method for a BIO pair. A BIO pair is a pair of source/sink BIOs where data written to either half of the pair is buffered and can be read from the other half. Both halves must usually be handled by the same application thread since no locking is done on the internal data structures. Since BIO chains typically end in a source/sink BIO, it is possible to make this one half of a BIO pair and have all the data processed by the chain under application control. One typical use of BIO pairs is to place TLS/SSL I/O under application control. This can be used when the application wishes to use a non-standard transport for TLS/SSL or the normal socket routines are inappropriate. Calls to BIO\_read(3) will read data from the buffer or request a retry if no data is available. Calls to BIO\_write(3) will place data in the buffer or request a retry if the buffer is full. The standard calls BIO\_ctrl\_pending(3) and BIO\_ctrl\_wpending(3) can be used to determine the amount of pending data in the read or write buffer. BIO\_reset(3) clears any data in the write buffer. **BIO\_make\_bio\_pair**() joins two separate BIOs into a connected pair. **BIO\_destroy\_pair**() destroys the association between two connected BIOs. Freeing up any half of the pair will automatically destroy the association. **BIO\_shutdown\_wr**() is used to close down a BIO *b*. After this call no further writes on BIO *b* are allowed; they will return an error. Reads on the other half of the pair will return any pending data or EOF when all pending data has been read. **BIO\_set\_write\_buf\_size**() sets the write buffer size of BIO *b* to *size*. If the size is not initialized, a default value is used. This is currently 17K, sufficient for a maximum size TLS record. When a chain containing a BIO pair is copied with BIO\_dup\_chain(3), the write buffer size is automatically copied from the original BIO object to the new one. **BIO\_get\_write\_buf\_size**() returns the size of the write buffer. **BIO\_new\_bio\_pair**() combines the calls to BIO\_new(3), **BIO\_make\_bio\_pair**() and **BIO\_set\_write\_buf\_size**() to create a connected pair of BIOs *bio1* and *bio2* with write buffer sizes *writebuf1* and *writebuf2*. If either size is zero, then the default size is used. **BIO\_new\_bio\_pair**() does not check whether *bio1* or *bio2* point to some other BIO; the values are overwritten and BIO\_free(3) is not called. **BIO\_get\_write\_guarantee**() and **BIO\_ctrl\_get\_write\_guarantee**() return the maximum length of data that can be currently written to the BIO. Writes larger than this value will return a value from BIO\_write(3) less than the amount requested or if the buffer is full request a retry. **BIO\_ctrl\_get\_write\_guarantee**() is a function whereas **BIO\_get\_write\_guarantee**() is a macro. **BIO\_get\_read\_request**() and **BIO\_ctrl\_get\_read\_request**() return the amount of data requested, or the buffer size if it is less, if the last read attempt at the other half of the BIO pair failed due to an empty buffer. This can be used to determine how much data should be written to the BIO so the next read will succeed: this is most useful in TLS/SSL applications where the amount of data read is usually meaningful rather than just a buffer size. After a successful read this call will return zero. It also will return zero once new data has been written satisfying the read request or part of it. Note that **BIO\_get\_read\_request**() never returns an amount larger than that returned by **BIO\_get\_write\_guarantee**(). **BIO\_ctrl\_reset\_read\_request**() can also be used to reset the value returned by **BIO\_get\_read\_request**() to zero. Both halves of a BIO pair should be freed. Even if one half is implicitly freed due to a BIO\_free\_all(3) or SSL\_free(3) call, the other half still needs to be freed. When used in bidirectional applications (such as TLS/SSL), care should be taken to flush any data in the write buffer. This can be done by calling BIO\_pending(3) on the other half of the pair and, if any data is pending, reading it and sending it to the underlying transport. This must be done before any normal processing (such as calling [select(2)](/select/2.md)) due to a request and BIO\_should\_read(3) being true. To see why this is important, consider a case where a request is sent using BIO\_write(3) and a response read with BIO\_read(3), this can occur during a TLS/SSL handshake for example. BIO\_write(3) will succeed and place data in the write buffer. BIO\_read(3) will initially fail and BIO\_should\_read(3) will be true. If the application then waits for data to become available on the underlying transport before flushing the write buffer, it will never succeed because the request was never sent. BIO\_eof(3) is true if no data is in the peer BIO and the peer BIO has been shutdown. BIO\_ctrl(3) *cmd* arguments correspond to macros as follows: | | | | --- | --- | | *cmd* constant | corresponding macro | | BIO\_C\_DESTROY\_BIO\_PAIR | **BIO\_destroy\_bio\_pair**() | | BIO\_C\_GET\_READ\_REQUEST | **BIO\_get\_read\_request**() | | BIO\_C\_GET\_WRITE\_BUF\_SIZE | **BIO\_get\_write\_buf\_size**() | | BIO\_C\_GET\_WRITE\_GUARANTEE | **BIO\_get\_write\_guarantee**() | | BIO\_C\_MAKE\_BIO\_PAIR | **BIO\_make\_bio\_pair**() | | BIO\_C\_RESET\_READ\_REQUEST | **BIO\_ctrl\_reset\_read\_request**() | | BIO\_C\_SET\_WRITE\_BUF\_SIZE | **BIO\_set\_write\_buf\_size**() | | BIO\_C\_SHUTDOWN\_WR | **BIO\_shutdown\_wr**() | | BIO\_CTRL\_EOF | BIO\_eof(3) | | BIO\_CTRL\_GET\_CLOSE | BIO\_get\_close(3) | | BIO\_CTRL\_PENDING | BIO\_pending(3) | | BIO\_CTRL\_RESET | BIO\_reset(3) | | BIO\_CTRL\_SET\_CLOSE | BIO\_set\_close(3) | | BIO\_CTRL\_WPENDING | BIO\_wpending(3) | ## RETURN VALUES **BIO\_new\_bio\_pair**() returns 1 on success, with the new BIOs available in *bio1* and *bio2*, or 0 on failure, with NULL pointers stored into the locations for *bio1* and *bio2*. Check the error stack for more information. When called on a BIO pair BIO object, BIO\_method\_type(3) returns the constant BIO\_TYPE\_BIO and BIO\_method\_name(3) returns a pointer to the static string "BIO pair". ## EXAMPLES The BIO pair can be used to have full control over the network access of an application. The application can call [select(2)](/select/2.md) on the socket as required without having to go through the SSL interface. ``` BIO *internal_bio, *network_bio; ... BIO_new_bio_pair(&internal_bio, 0, &network_bio, 0); SSL_set_bio(ssl, internal_bio, internal_bio); SSL_operations(); /* e.g. SSL_read() and SSL_write() */ ... application | TLS-engine | | +----------> SSL_operations() | /\ || | || \/ | BIO-pair (internal_bio) | BIO-pair (network_bio) | || /\ | \/ || +-----------< BIO_operations() | | socket | ... SSL_free(ssl); /* implicitly frees internal_bio */ BIO_free(network_bio); ... ``` As the BIO pair will only buffer the data and never directly access the connection, it behaves non-blocking and will return as soon as the write buffer is full or the read buffer is drained. Then the application has to flush the write buffer and/or fill the read buffer. Use BIO\_ctrl\_pending(3) to find out whether data is buffered in the BIO and must be transferred to the network. Use **BIO\_ctrl\_get\_read\_request**() to find out how many bytes must be written into the buffer before the SSL operations can successfully be continued. ## SEE ALSO BIO\_new(3), BIO\_read(3), BIO\_should\_retry(3), [ssl(3)](/ssl/3.md), SSL\_set\_bio(3) ## HISTORY **BIO\_s\_bio**(), **BIO\_make\_bio\_pair**(), **BIO\_destroy\_bio\_pair**(), **BIO\_set\_write\_buf\_size**(), **BIO\_get\_write\_buf\_size**(), **BIO\_new\_bio\_pair**(), **BIO\_get\_write\_guarantee**(), **BIO\_ctrl\_get\_write\_guarantee**(), **BIO\_get\_read\_request**(), and **BIO\_ctrl\_reset\_read\_request**() first appeared in OpenSSL 0.9.4 and have been available since OpenBSD 2.6. **BIO\_ctrl\_reset\_read\_request**() first appeared in OpenSSL 0.9.5 and has been available since OpenBSD 2.7. **BIO\_shutdown\_wr**() first appeared in OpenSSL 0.9.6 and has been available since OpenBSD 2.9. ## CAVEATS As the data is buffered, SSL operations may return with an ERROR\_SSL\_WANT\_READ condition, but there is still data in the write buffer. An application must not rely on the error value of the SSL operation but must assure that the write buffer is always flushed first. Otherwise a deadlock may occur as the peer might be waiting for the data before being able to continue.