---
name: "hpialarms"
section: "1"
platform: "linux"
package: "openhpi-clients"
version: "3.8.0-2.3"
release: "Debian 13 (Trixie)"
platforms: ["linux"]
url: "https://new.carta.tech/hpialarms"
---

# hpialarms(1)

A openhpi sample application that shows "Alarm Control" management instruments

## NAME

hpialarms - A openhpi sample application that shows "Alarm Control" management instruments

## SYNOPSIS

```
 hpialarms [-D id] [-N host[:port]] [-C <cfgfile>]
           [-a 1|0][-b 1|0][-c 1|0][-m 1|0][-n 1|0][-p 1|0][-i n][-o][-X][-h]
 hpialarms [--domain=id] [--host=host[:port]] [--cfgfile=file]
           [--diska=1|0] [--diskb=1|0] [--critical=1|0] [--major=1|0]
           [--minor=1|0] [--power=1|0] [--chassisid=n] [--all] [--debug] [--help]
```

## DESCRIPTION

hpialarms walks the RPT (Resource Presence Table) for resources that have  "Alarm Control" management instruments (SAHPI\_CTRL\_LED).

If no domain or host is selected, hpialarms uses the default domain as specified in the openhpiclient.conf file.

## OPTIONS

(No Option) Display alarm states

### Help Options:

- **-h**, **--help**

  Show help options

### Application Options:

- **-c** *1\|0*, -**-critical**=*1\|0*

  Set critical alarm on\|off

- **-m** *1\|0*, -**-major**=*1\|0*

  Set major alarm on\|off

- **-n** *1\|0*, -**-minor**=*1\|0*

  Set minor alarm on\|off

- **-a** *1\|0*, -**-diska**=*1\|0*

  Set diska alarm on\|off

- **-b** *1\|0*, -**-diskb**=*1\|0*

  Set diskb alarm on\|off

- **-p** *1\|0*, -**-power**=*1\|0*

  Set power alarm on\|off

- **-i** *n*, -**-chassisid**=*n*

  Set chassis id on for *n* seconds

- **-o**, -**-all**

  Set all alarms off

- **-D** *nn*, **--domain**=*nn*

  Select domain id *nn*

- **-X**, **--debug**

  Display debug messages

- **-N** *"host\[:port\]"*, **--host**=*"host\[:port\]"*

  Open session to the domain served by the daemon at the specified URL (host:port). This option overrides the OPENHPI\_DAEMON\_HOST and OPENHPI\_DAEMON\_PORT environment variables. If host contains ':' (for example IPv6 address) then enclose it in square brackets. For example: *"\[::1\]"* or *"\[::1\]:4743"*.

- **-C** *"file"*, **--cfgfile**=*"file"*

  Use passed file as client configuration file. This option overrides the OPENHPICLIENT\_CONF environment variable.

## SAMPLE OUTPUT

```
 hpialarmpanel ver 0.6
 RptInfo: UpdateCount = 5, UpdateTime = 8a2dc6c0
 rptentry[0] resourceid=1 tag: Mullins
 RDR[45]: ctltype=2:1 oem=0  Chassis Identify Control
 RDR[48]: ctltype=0:1 oem=10 Front Panel Power Alarm LED         state = off
 RDR[51]: ctltype=0:1 oem=13 Front Panel Minor Alarm LED         state = ON
 RDR[46]: ctltype=0:0 oem=0  Cold Reset Control
 RDR[49]: ctltype=0:1 oem=11 Front Panel Critical Alarm LED      state = off
 RDR[50]: ctltype=0:1 oem=12 Front Panel Major Alarm LED         state = off
```

## SEE ALSO

```
         hpi_shell
         hpidomain      hpigensimdata  hpireset       hpitop
         hpiel          hpiinv         hpisensor      hpitree
         hpievents      hpionIBMblade  hpisettime     hpiwdt
         hpifan         hpipower       hpithres       hpixml
         ohdomainlist   ohhandler      ohparam
```

## AUTHORS

Authors of this man page:

```
 Peter D Phan (pdphan@users.sourceforge.net)
 Ulrich Kleber (ulikleber@users.sourceforge.net)
 Anton Pak (avpak@users.sourceforge.net)
```