---
name: "hp100vg-diag"
section: "8"
platform: "linux"
package: "nictools-nopci"
version: "1.3.3-1"
release: "Debian 6.0 (Squeeze)"
platforms: ["linux"]
url: "https://new.carta.tech/hp100vg-diag"
---

# hp100vg-diag(8)

Diagnostic program for HP 100VG vetwork adaptors

## NAME

hp+-diag - Diagnostic program for HP 100VG vetwork adaptors

## SYNOPSIS

**hp+-diag** \[*options*\]

## DESCRIPTION

**hp100vg-diag** is a diagnostic program for the HP 100VG Ethernet adapter using the Lucent ATT2MD01 chips. You can use this program to diagnose problems with your enternet adapters.

## OPTIONS

These programs follow the usual GNU command line syntax, with long options starting with two dashes (\`-'). A summary of options is included below.

- **-h, --help**

  Show summary of options.

- **-V, --version**

  Show version of program.

- **-v, --verbose**

  Verbose mode.

- **-D, --debug**

  Debug mode.

- **-a, --show\_all\_registers**

  Print all registers.

- **-e, --show-eeprom**

  Dump EEPROM contents,

- **-m, --show\_mii**

  Print the MII transceiver state Using -mm monitors the link.

- **-f, --force**

  Perform operation, even on a running NIC.

- **-p, --port-base \<port\>**

  Specify port to use. Valid values are: 0x240, 0x280, 0x300, 0x320, 0x340, 0x360

- **-#, --card\_num \<number\>**

  Operate on the specified card index.

- **-t, --chip-type \<type\> Specify adapter type with '-p', use '-1' to list.**

  - **-G, --parameters \<parms\>**

  Write adapter-specific parameters in the persistent EEPROM settings.

- **-H, --new-hwaddr 01:23:45:67:ab:cd**

  Set a new hardware station address.  Typically diabled.

- **-B**

  Show the first few bytes of the ROM

- **-L \<file\>**

  Load the Flash from FILE.

- **-S \<file\>**

  Store the Flash image to FILE.

- **-w, --write-EEPROM \<values\>**

  Write to the EEPROMS with the specified values.

## SEE ALSO

[**mii-diag**(8)](/mii-diag/8.md)

## AUTHOR

This manual page was written by Alain Schroeder \<alain@debian.org\>, for the Debian GNU/Linux system (but may be used by others).