NAME
gpx - G-code to X3G converter
SYNOPSIS
- gpx [-CFdgilpqrstvw] [-b BAUDRATE] [-c CONFIG] [-e EEPROM] [-f DIAMETER] [-m MACHINE] [-N h|t|ht] [-n SCALE] [-x X] [-y Y] [-z Z] IN [OUT]
OPTIONS
- -C
-
Create temporary file with a copy of the machine configuration
- -C
-
Create temporary file with a copy of the machine configuration
- -F
-
write X3G on-wire framing data to output file
- -N h|t|ht
-
Disable writing of the X3G header (start build notice), tail (end build notice), or both
- -d
-
simulated ditto printing
- -g
-
Makerbot/ReplicatorG GCODE flavor
- -i
-
enable stdin and stdout support for command line pipes
- -l
-
log to file
- -p
-
override build percentage
- -q
-
quiet mode
- -r
-
Reprap GCODE flavor
- -s
-
enable USB serial I/O and send x3G output to 3D printer
- -t
-
truncate filename (DOS 8.3 format)
- -v
-
verose mode
- -w
-
rewrite 5d extrusion values
- -b BAUDRATE
-
Set BAUDRATE for serial I/O. Default is 115200.
- -c CONFIG
-
CONFIG is the filename of a custom machine definition (ini file).
- -e EEPROM
-
EEPROM is the filename of an eeprom settings definition (ini file).
- -f DIAMETER
-
DIAMETER is the actual filament diameter in the printer.
- -m MACHINE
-
MACHINE is the predefined machine type. Available configurations are:
- c3
-
= Cupcake Gen3 XYZ, Mk5/6 + Gen4 Extruder
- c4
-
= Cupcake Gen4 XYZ, Mk5/6 + Gen4 Extruder
- cp4
-
= Cupcake Pololu XYZ, Mk5/6 + Gen4 Extruder
- cpp
-
= Cupcake Pololu XYZ, Mk5/6 + Pololu Extruder
- cxy
-
= Core-XY with HBP - single extruder
- cxysz
-
= Core-XY with HBP - single extruder, slow Z
- cr1
-
= Clone R1 Single with HBP
- cr1d
-
= Clone R1 Dual with HBP
- r1
-
= Replicator 1 - single extruder
- r1d
-
= Replicator 1 - dual extruder
- r2
-
= Replicator 2 (default)
- r2h
-
= Replicator 2 with HBP
- r2x
-
= Replicator 2X
- t6
-
= TOM Mk6 - single extruder
- t7
-
= TOM Mk7 - single extruder
- t7d
-
= TOM Mk7 - dual extruder
- z
-
= ZYYX - single extruder
- zd
-
= ZYYX - dual extruder
- -n SCALE
-
SCALE is the coordinate system scale for the conversion (ABS = 1.0035)
- -x X, -y Y, -z Y
-
X = the x axis offset
Y = the y axis offset
Z = the z axis offset
EXAMPLES
- gpx -p -m r2 my-sliced-model.gcode
- gpx -c custom-tom.ini example.gcode /volumes/things/example.x3g
- gpx -x 3 -y -3 offset-model.gcode
- gpx -m c4 -s sio-example.gcode /dev/tty.usbmodem