Reference

geom_zero(4)

GEOM-based zero disk/block device

NAME

gzero, geom_zero – GEOM-based zero disk/block device

SYNOPSIS

options GEOM_ZERO

In loader.conf(5) or sysctl.conf(5): kern.geom.zero.byte kern.geom.zero.clear

DESCRIPTION

gzero is a GEOM(4) device simulating a one-exabyte disk. It throws away any data written to it, and returns the value of kern.geom.zero.byte for every byte read from it.

gzero differs from zero(4), which is a regular character device and has an infinite length, while /dev/gzero is a GEOM(4) provider of large, but limited, size.

Consult geom(8) for instructions on how to use the supported commands of the GEOM(4) ZERO class.

gzero is useful for benchmarking performance of GEOM and GEOM classes where compression of the data does not affect the results (blocks from /dev/gzero compress exceptionally well). Examples of such benchmarks include comparing the speed of two disk encryption algorithms and comparing a hardware versus software implementation of a single encryption algorithm.

MIB VARIABLES

The following variables are available as both sysctl(8) variables and loader(8) tunables:

kern.geom.zero.byte

This variable sets the fill byte of the gzero device. Default: ‘0’.

kern.geom.zero.clear

This variable controls the clearing of the read data buffer. If set to ‘0’, gzero will not copy any data into the read data buffers and just return the read data buffers as they are without modifying them. In particular, it will not fill the read buffer with the value of kern.geom.zero.byte. This is useful for read benchmarking to reduce the measurement noise caused by extra memory initialization. Default: ‘1’.

FILES

/dev/gzero

The gzero device.

EXAMPLES

Create the /dev/gzero device by loading the geom_zero kernel module:

# geom zero load

Show information about the gzero device:

# geom zero list
Geom name: gzero
Providers:
1. Name: gzero
   Mediasize: 1152921504606846976 (1.0E)
   Sectorsize: 512
   Mode: r0w0egzero0

Set the fill byte of the gzero device to 70 (decimal for letter “F” in ascii(7)):

# sysctl kern.geom.zero.byte=70
kern.geom.zero.byte: 0 -> 70
# head -c 1 /dev/gzero
F

Benchmark read and write throughput of geli(8)'s default encryption algorithm with a 4-KiB sector size:

# geom zero load
# geli onetime -s 4096 gzero
# sysctl kern.geom.zero.clear=0
# dd if=/dev/gzero.eli of=/dev/zero bs=4k count=$((1024 * 256))
262144+0 records in
262144+0 records out
1073741824 bytes transferred in 1.258195 secs (853398307 bytes/sec)
# dd if=/dev/zero of=/dev/gzero.eli bs=4k count=$((1024 * 256))
262144+0 records in
262144+0 records out
1073741824 bytes transferred in 1.663118 secs (645619658 bytes/sec)

SEE ALSO

GEOM(4), zero(4), geom(8), sysctl(8), bio(9)

HISTORY

A gzero device first appeared in FreeBSD 6.

AUTHORS

The gzero device was written by Paweł Jakub Dawidek ⟨[email protected]⟩.

The gzero manual page was originally written by Greg White ⟨[email protected]⟩ and rewritten by Mateusz Piotrowski ⟨[email protected]⟩ before landing in FreeBSD.

History