--- name: "erl_driver" section: "1" platform: "linux" package: "erlang-manpages" version: "1:10.b.1a-1" release: "Debian 3.1 (Sarge)" platforms: ["linux"] url: "https://new.carta.tech/erl_driver" --- # erl\_driver(1) API functions for an erlang driver ## NAME erl\_driver - API functions for an erlang driver ## DESCRIPTION The driver calls back to the emulator, using the API functions declared in *erl\_driver.h*. They are used for outputting data from the driver, using timers, etc. A driver is a library with a set of function that the emulator calls, in response to erlang functions and message sending. There may be multiple instances of a driver, each instance is connected to an erlang port. Every port has a port owner process. Communication with the port is normally done through the port owner process. Most of the functions takes the *port* handle as an argument. This identifies the driver instance. Note that this port handle must be stored by the driver, it is not given when the driver is called from the emulator (see driver\_entry). Some of the functions takes a parameter of type *ErlDrvBinary*, a driver binary. It should be both allocated and freed by the caller. Using a binary directly avoid one extra copying of data. Many of the output functions has a "header buffer", with *hbuf* and *hlen* parameters. This buffer is sent as a list before the binary (or list, depending on port mode) that is sent. This is convenient when matching on messages received from the port. (Although in the latest versions of erlang, there is the binary syntax, that enables you to match on the beginning of a binary.) ## Functionality All functions that a driver needs to do with erlang are performed through driver API functions. There are functions for the following functionality: - **Timer functions:** Timer functions are used to control the timer that a driver may use. The timer will have the emulator call the timeout entry function after a specified time. Only one timer is available for each driver instance. - **Queue handling:** Every driver has an associated queue. This queue is a *SysIOVec* that works as a buffer. It's mostly used for the driver to buffer data that should be written to a device, it is a byte stream. If the port owner process closes the driver, and the queue is not empty, the driver will not be closed. This enables the driver to flush its buffers before closing. - **Output functions:** With the output functions, the driver sends data back the emulator. They will be received as messages by the port owner process, see *open\_port/2*. The vector function and the function taking a driver binary is faster, because thet avoid copying the data buffer. There is also a fast way of sending terms from the driver, without going through the binary term format. - **Failure:** The driver can exit and signal errors up to erlang. This is only for severe errors, when the driver can't possibly keep open. - **Asynchronous calls:** The latest erlang versions (R7B and later) has provision for asynchonous function calls, using a thread pool provided by erlang. There is also a select call, that can be used for asynchronous drivers. - **Adding / remove drivers:** A driver can add and later remove drivers. ## EXPORTS **ErlDrvBinary**\ - Types int orig\_size\ int refc\ char orig\_bytes\[\]\ The *ErlDrvBinary* structure is a binary, as sent between the emulator and the driver. All binaries are reference counted; when *driver\_binary\_free* is called, the *refc* field is decremented, when it reaches zero, the binary is deallocated. The *orig\_size* is the size of the binary, and *orig\_bytes* is the buffer. The *ErlDrvBinary* does not have a fixed size, its size is *orig\_size + 2 \* sizeof(int)*. Some driver calls, such as *driver\_enq\_binary*, increments the driver ref-count, and others, such as *driver\_deq* decrements it. Using a driver binary instead of a normal buffer, is often faster, since the emulator doesn't need to copy the data, only the pointer is used. A driver binary allocated in the driver, with *driver\_alloc\_binary*, should be freed in the driver, with *driver\_free\_binary*. (Note that this doesn't necessarily deallocate it, if the driver is still referred in the emulator, the ref-count will not go to zero.) Driver binaries are used in the *driver\_output2* and *driver\_outputv* calls, and in the queue. Also the driver call-back outputv uses driver binaries. If the driver of some reason or another, wants to keep a driver binary around, in a static variable for instance, the ref-count in the *refc* field should be incremented, and the binary can later be freed in the stop call-back, with *driver\_free\_binary*. Note that since a driver binary is shared by the driver and the emulator, a binary received from the emulator or sent to the emulator, shouldn't be changed by the driver. **ErlDrvData**\ The *ErlDrvData* is a handle to driver-specific data, passed to the driver call-backs. It is a pointer, and is most often casted to a specific pointer in the driver. **SysIOVec**\ This is a system I/O vector, as used by *writev* on unix and *WSASend* on Win32. It is used in *ErlIOVec*. **ErlIOVec**\ - Types int vsize\ int size\ SysIOVec\* iov\ ErlDrvBinary\*\* binv\ The I/O vector used by the emulator and drivers, is a list of binaries, with a *SysIOVec* pointing to the buffers of the binaries. It is used in *driver\_outputv* and the outputv driver call-back. Also, the driver queue is an *ErlIOVec*. **int driver\_output(ErlDrvPort port, char \*buf, int len)**\ The *driver\_output* function is used to send data from the driver up to the emulator. The data will be received as terms or binary data, depending on how the driver port was opened. The data is queued in the port owner process' message queue. Note that this does not yield to the emulator. (Since the driver and the emulator runs in the same thread.) The parameter *buf* points to the data to send, and *len* is the number of bytes. The return value for all output functions is 0. (Unless the driver is used for distribution, in which case it can fail and return -1. For normal use, the output function always returns 0.) **int driver\_output2(ErlDrvPort port, char \*hbuf, int hlen, char \*buf, int len)**\ The *driver\_output2* function first sends *hbuf* (length in *hlen*) data as a list, regardless of port settings. Then *buf* is sent as a binary or list. E.g. if *hlen* is 3 then the port owner process will receive *\[H1, H2, H3 \| T\]*. The point of sending data as a list header, is to facilitate matching on the data received. The return value is 0 for normal use. **int driver\_output\_binary(ErlDrvPort port, char \*hbuf, int hlen, ErlDrvBinary\* bin, int offset, int len)**\ This function sends data to port owner process from a driver binary, it has a header buffer (*hbuf* and *hlen*) just like *driver\_output2*. The *hbuf* parameter can be *NULL*. The parameter *offset* is an offset into the binary and *len* is the number of bytes to send. Driver binaries are created with *driver\_alloc\_binary*. The data in the header is sent as a list and the binary as an erlang binary in the tail of the list. E.g. if *hlen* is 2, then the port owner process will receive *\[H1, H2 \| \<\\>\]*. The return value is 0 for normal use. Note that, using the binary syntax in erlang, the driver application can match the header directly from the binary, so the header can be put in the binary, and hlen can be set to 0. **int driver\_outputv(ErlDrvPort port, char\* hbuf, int hlen, ErlIOVec \*ev, int skip)**\ This function sends data from an IO vector, *ev*, to the port owner process. It has a header buffer (*hbuf* and *hlen*), just like *driver\_output2*. The *skip* parameter is a number of bytes to skip of the *ev* vector from the head. You get vectors of *ErlIOVec* type from the driver queue (see below), and the outputv driver entry function. You can also make them yourself, if you want to send several *ErlDriverBinary* buffers at once. Often it is faster to use *driver\_output* or *driver\_output\_binary*. E.g. if *hlen* is 2 and *ev* points to an array of three binaries, the port owner process will receive *\[H1, H2, \<\\>, \<\\> \| \<\\>\]*. The return value is 0 for normal use. The comment for *driver\_output\_binary* applies for *driver\_outputv* too. **int driver\_vec\_to\_buf(ErlIOVec \*ev, char \*buf, int len)**\ This function collects several segments of data, referenced by *ev*, by copying them in order to the buffer *buf*, of the size *len*. If the data is to be sent from the driver to the port owner process, it is faster to use *driver\_outputv*. The return value is the space left in the buffer, i.e. if the *ev* contains less than *len* bytes it's the difference, and if *ev* contains *len* bytes or more, it's 0. This is faster if there is more than one header byte, since the binary syntax can construct integers directly from the binary. **int driver\_set\_timer(ErlDrvPort port, unsigned long time)**\ This function sets a timer on the driver, which will count down and call the driver when it is timed out. The *time* parameter is the time in milliseconds before the timer expires. When the timer reaches 0 and expires, the driver entry function timeout is called. Note that there is only one timer on each driver instance; setting a new timer will replace an older one. Return value i 0 (-1 only when the *timeout* driver function is *NULL*). **int driver\_cancel\_timer(ErlDrvPort port)**\ This function cancels a timer set with *driver\_set\_timer*. The return value is 0. **int driver\_read\_timer(ErlDrvPort port, unsigned long \*time\_left)**\ This function reads the current time of a timer, and places the result in *time\_left*. This is the time in milliseconds, before the timeout will occur. The return value is 0. **int driver\_select(ErlDrvPort port, ErlDrvEvent event, int mode, int on)**\ The *driver\_select* is used by the driver to provide the emulator with an event to check for. This enables the emulator to call the driver when something has happened asynchronously. The *event* parameter is used in the emulator cycle in a *select* call. If the event is set then the driver is called. The *mode* parameter can be either *ON\_READ* or *ON\_WRITE*, and specifies whether ready\_output or ready\_input will be called when the event is fired. Note that this is just a convention, they don't have to read or write anything. The *on* parameter should be *1* for adding the event and *0* for removing it. On unix systems, the function *select* is used. The *event* must be a socket or pipe (or other object that *select* can use). On windows, the Win32 API function *WaitForMultipleObjects* is used. This places other restriction on the *event*. Refer to the Win32 SDK documentation. The return value is 0 (Failure, -1, only if the *ready\_input*/*ready\_output* is *NULL*. **void \*driver\_alloc(size\_t size)**\ This function allocates a memory block of the size specified in *size*, and returns it. This only fails on out of memory, in that case *NULL* is returned. (This is most often a wrapper for *malloc*). Memory allocated must be explicitly freed. Every *driver\_alloc* call must have a corresponding *driver\_free*. **void \*driver\_realloc(void \*ptr, size\_t size)**\ This function resizes a memory block, either in place, or by allocating a new block, copying the data and freeing the old block. A pointer is returned to the reallocated memory. On failure (out of memory), *NULL* is returned. (This is most ofthen a wrapper for *realloc*.) **void driver\_free(void \*ptr)**\ This function frees the memory pointed to by *ptr*. The memory should have been allocated with *driver\_alloc*. All allocated memory should be deallocated, just once. There is no garbage collection in drivers. **ErlDrvBinary\* driver\_alloc\_binary(int size)**\ This function allocates a driver binary with a memory block of at least *size* bytes, and returns a pointer to it, or NULL on failure (out of memory). When a driver binary has been sent to the emulator, it shouldn't be altered. Every allocated binary should be freed. Note that a driver binary has an internal reference counter, this means that calling *driver\_free\_binary* it may not actually dispose of it. If it's sent to the emulator, it may be referenced there. The driver binary has a field, *orig\_bytes*, which marks the start of the data in the binary. **ErlDrvBinary\* driver\_realloc\_binary(ErlDrvBinary \*bin, int size)**\ This function resizes a driver binary, while keeping the data. The resized driver binary is returned. On failure (out of memory), *NULL* is returned. **void driver\_free\_binary(ErlDrvBinary \*bin)**\ This function frees a driver binary *bin*, allocated previously with *driver\_alloc\_binary*. Since binaries in erlang are reference counted, the binary may still be around. Every call to *driver\_alloc\_binary* should have a matching call to *driver\_free\_binary*. **int driver\_enq(ErlDrvPort port, char\* buf, int len)**\ This function enqueues data in the driver queue. The data in *buf* is copied (*len* bytes) and placed at the end of the driver queue. The driver queue is normally used in a FIFO way. The driver queue is available to queue output from the emulator to the driver (data from the driver to the emulator is queued by the emulator in normal erlang message queues). This can be useful if the driver has to wait for slow devices etc, and wants to yield back to the emulator. The driver queue is implemented as an ErlIOVec. When the queue contains data, the driver won't close, until the queue is empty. The return value is 0. **int driver\_pushq(ErlDrvPort port, char\* buf, int len)**\ This function puts data at the head of the driver queue. The data in *buf* is copied (*len* bytes) and placed at the beginning of the queue. The return value is 0. **int driver\_deq(ErlDrvPort port, int size)**\ This function dequeues data by moving the head pointer forward in the driver queue by *size* bytes. The data in the queue will be dealloced. The return value is 0. **int driver\_sizeq(ErlDrvPort port)**\ This function returns the number of bytes currently in the driver queue. **int driver\_enq\_bin(ErlDrvPort port, ErlDrvBinary \*bin, int offset, int len)**\ This function enqueues a driver binary in the driver queue. The data in *bin* at *offset* with length *len* is placed at the end of the queue. This function is most often faster than *driver\_enq*, because the data doesn't have to be copied. The return value is 0. **int driver\_pushq\_bin(ErlDrvPort port, ErlDrvBinary \*bin, int offset, int len)**\ This function puts data in the binary *bin*, at *offset* with length *len* at the head of the driver queue. It is most often faster than *driver\_pushq*, because the data doesn't have to be copied. The return value is 0. **SysIOVec\* driver\_peekq(ErlDrvPort port, int \*vlen)**\ This function retrieves the driver queue as a pointer to an array of *SysIOVec*s. It also returns the number of elements in *vlen*. This is the only way to get data out of the queue. Nothing is remove from the queue by this function, that must be done with *driver\_deq*. The returned array is suitable to use with the unix system call *writev*. **int driver\_enqv(ErlDrvPort port, ErlIOVec \*ev, int skip)**\ This function enqueues the data in *ev*, skipping the first *skip* bytes of it, at the end of the driver queue. It is faster than *driver\_enq*, because the data doesn't have to be copied. The return value is 0. **int driver\_pushqv(ErlDrvPort port, ErlIOVec \*ev, int skip)**\ This function puts the data in *ev*, skipping the first *skip* bytes of it, at the head of the driver queue. It is faster than *driver\_pushq*, because the data doesn't have to be copied. The return value is 0. **void add\_driver\_entry(ErlDrvEntry \*de)**\ This function adds a driver entry to the list of drivers known by erlang. The init function of the *de* parameter is called. **int remove\_driver\_entry(ErlDrvEntry \*de)**\ This function removes a driver entry *de* previously added with *add\_driver\_entry*. **char\* erl\_errno\_id(int error)**\ This function returns the atom name of the erlang error, given the error number in *error*. Error atoms are: *einval*, *enoent*, etc. It can be used to make error terms from the driver. **void set\_busy\_port(ErlDrvPort port, int on)**\ This function set and resets the busy status of the port. If *on* is 1, the port is set to busy, if it's 0 the port is set to not busy. When the port is busy, sending to it with *Port ! Data* or *port\_command/2*, will block the port owner process, until the port is signaled as not busy. **void set\_port\_control\_flags(ErlDrvPort port, int flags)**\ This function sets flags for how the control driver entry function will return data to the port owner process. (The *control* function is called from *port\_control/3* in erlang.) Currently there are only two meaningful values for *flags*: 0 means that data is returned in a list, and *PORT\_CONTROL\_FLAG\_BINARY* means data return from *control* is sent to the port owner process. **int driver\_failure\_eof(ErlDrvPort port)**\ This function signals to erlang that the driver has encountered an EOF and should be closed, unless the port was opened with the *eof* option, in that case eof is sent to the port. Otherwise, the port is close and an *'EXIT'* message is sent to the port owner process. The return value is 0. **int driver\_failure\_atom(ErlDrvPort port, char \*string)**\ **int driver\_failure\_posix(ErlDrvPort port, int error)**\ **int driver\_failure(ErlDrvPort port, int error)**\ These functions signal to erlang that the driver has encountered an error and should be closed. The port is closed and the tuple *{'EXIT', error, Err}*, is sent to the port owner process, where error is an error atom (*driver\_failure\_atom* and *driver\_failure\_posix*), or an integer (*driver\_failure*). The driver should fail only when in severe error situations, when the driver cannot possibly kepp open, for instance buffer allocation gets out of memory. Normal errors is more appropriate to handle with sending error codes with *driver\_output*. The return value is 0. **ErlDriverTerm driver\_connected(ErlDrvPort port)**\ This function returns the port owner process. **ErlDriverTerm driver\_caller(ErlDrvPort port)**\ This function returns the process that made the current call to the driver. This can be used with *driver\_send\_term* to send back data to the caller. (This is the process that called one of *erlang:send/2*, *erlang:port\_command/2* or *erlang:port\_control/3*). **int driver\_output\_term(ErlDrvPort port, ErlDriverTerm\* term, int n)**\ This functions sends data in the special driver term format. This is a fast way to deliver term data to from a driver. It also needs no binary conversion, so the port owner process receives data as normal erlang terms. The *term* parameter points to an array of *ErlDriverTerm*, with *n* elements. This array contains terms described in the driver term format. Every term consists of one to four elements in the array. The term first has a term type, and then arguments. Tuple and lists (with the exception of strings, see below), are built in reverse polish notation, so that to build a tuple, the elements are given first, and then the tuple term, with a count. Likewise for lists. A tuple must be specified with the number of elements. (The elements precedes the *ERL\_DRV\_TUPLE* term.) A list must be specified with the number of elements, including the tail, which is the last term preceding *ERL\_DRV\_LIST*. The special term *ERL\_DRV\_STRING\_CONS* is used to "splice" in a string in a list, a string given this way is not a list per se, but the elements are elements of the surrounding list. ``` Term type Argument(s) =========================================== ERL_DRV_NIL None ERL_DRV_ATOM driver_mk_atom(string) ERL_DRV_INT int ERL_DRV_PORT driver_mk_port(ix) ERL_DRV_BINARY ErlDriverBinary*, int len, int offset ERL_DRV_STRING char*, int len ERL_DRV_TUPLE int size ERL_DRV_LIST int size ERL_DRV_PID driver_connected,... ERL_DRV_STRING_CONS char*, int len ``` To build the tuple *{tcp, Port, \[100 \| Binary\]}*, the following call could be made. ``` ErlDriverBinary* bin = ... ErlDriverPort port = ... ErlDriverTerm spec[] = { ERL_DRV_ATOM, driver_mk_atom("tcp"), ERL_DRV_PORT, driver_mk_port(port), ERL_DRV_INT, 100, ERL_DRV_BINARY, bin, 50, 0, ERL_DRV_LIST, 2, ERL_DRV_TUPLE, 3, }; driver_output_term(port, spec, sizeof(spec) / sizeof(spec[0])); ``` Where *bin* is a driver binary of length at least 50 and *port* is a port handle. Note that the *ERL\_DRV\_LIST* comes after the elements of the list, likewise the *ERL\_DRV\_TUPLE*. The term *ERL\_DRV\_STRING\_CONS* is a way to construct strings. It works differently from how *ERL\_DRV\_STRING* works. *ERL\_DRV\_STRING\_CONS* builds a string list in reverse order, (as opposed to how *ERL\_DRV\_LIST* works), concatenating the strings added to a list. The tail must be given before *ERL\_DRV\_STRING\_CONS*. The *ERL\_DRV\_STRING* constructs a string, and ends it. (So it's the same as *ERL\_DRV\_NIL* followed by *ERL\_DRV\_STRING\_CONS*.) ``` /* to send [x, "abc", y] to the port: */ ErlDriverTerm spec[] = { ERL_DRV_ATOM, driver_mk_atom("x"), ERL_DRV_STRING, (ErlDriverTerm)"abc", 3, ERL_DRV_ATOM, driver_mk_atom("y"), ERL_DRV_NIL, ERL_DRV_LIST, 4 }; driver_output_term(port, spec, sizeof(spec) / sizeof(spec[0])); ``` ``` /* to send "abc123" to the port: */ ErlDriverTerm spec[] = { ERL_DRV_NIL, /* with STRING_CONS, the tail comes first */ ERL_DRV_STRING_CONS, (ErlDriverTerm)"123", 3, ERL_DRV_STRING_CONS, (ErlDriverTerm)"abc", 3, }; driver_output_term(port, spec, sizeof(spec) / sizeof(spec[0])); ``` **ErlDriverTerm driver\_mk\_atom(char\* string)**\ This function returns an atom given a name *string*. The atom is created and won't change, so the return value may be saved and reused, which is faster than looking up the atom several times. **ErlDriverTerm driver\_mk\_port(ErlDrvPort port)**\ This function converts a port handle to the erlang term format, usable in the *driver\_output\_send* function. **int driver\_send\_term(ErlDrvPort port, ErlDriverTerm receiver, ErlDriverTerm\* term, int n)**\ This function is the only way for a driver to send data to *other* processes than the port owner process. The *receiver* parameter specifies the process to receive the data. The parameters *term* and *n* does the same thing as in driver\_output\_term. **long driver\_async (ErlDrvPort port, unsigned int\* key, void (\*async\_invoke)(void\*), void\* async\_data, void (\*async\_free)(void\*))**\ This function performs an asynchronous call. The function *async\_invoke* is invoked in a thread separate from the emulator thread. This enables the driver to perform time-consuming, blocking operations without blocking the emulator. Normally, erlang is started without a thread pool. A start argument to the emulator, specifies how many threads that should be available (e.g. *+A 5*, gives five extra driver threads). If no thread pool is available, the call is made synchronously, in the emulator thread. If there is a thread pool available, a thread will be used. If the *key* argument is null, the threads from the pool are used in a round-robin way, each call to *driver\_async* uses the next thread in the pool. With the *key* argument set, this behaviour is changed. The two same values of *\*key* always get the same thread. To make sure that a driver instance always uses the same thread, the following call can be used: ``` r = driver_async(myPort, (unsigned char*)&myPort, myData, myFunc); ``` If a thread is already working, the calls will be queued up and executed in order. Using the same thread for each driver instance ensures that the calls will be made in sequence. The *async\_data* is the argument to the functions *async\_invoke* and *async\_free*. It's typically a pointer to a structure that contains a pipe or event that can be used to signal that the async operation completed. The data should be freed in *async\_free*, because it's called if *driver\_async\_cancel* is called. When the async operation is done, ready\_async driver entry function is called. If *async\_ready* is null in the driver entry, the *async\_free* function is called instead. The return value is a handle to the asynchronous task, which can be used as argument to *driver\_async\_cancel*. **int driver\_async\_cancel(long id)**\ This function cancels an asynchronous operation, by removing it from the queue. Only functions in the queue can be cancelled; if a function is executing, it's too late to cancel it. The *async\_free* function is also called. The return value is 1 if the operation was removed from the queue, otherwise 0. ## See Also driver\_entry(3), erl\_ddll(3), erlang(3) An Alternative Distribution Driver (ERTS User's Guide Ch. 3) ## AUTHORS ``` Kenneth Lundin - support@erlang.ericsson.se Jakob Cederlund - support@erlang.ericsson.se ```