---
name: "eexpress-diag"
section: "8"
platform: "linux"
package: "nictools-nopci"
version: "1.3.3-1"
release: "Debian 6.0 (Squeeze)"
platforms: ["linux"]
url: "https://new.carta.tech/eexpress-diag"
---

# eexpress-diag(8)

Diagnostic program for Intel EtherExpress 16

## NAME

eexpress-diag - Diagnostic program for Intel EtherExpress 16

## SYNOPSIS

**eexpress-diag** \[*options*\]

## DESCRIPTION

**eexpress-diag** is a programm which you can use to diagnose problems with your Intel EtherExpress 16 cards.

## OPTIONS

These programs follow the usual GNU command line syntax, with long options starting with two dashes (\`-'). A summary of options is included below.

- **-h, --help**

  Show summary of options.

- **-V, --version**

  Show version of program.

- **-v, --verbose**

  Verbose mode.

- **-a, --all**

  Print all registers.

- **-p, --base-address \<port\>**

  Specify port to use. Valid values are: 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0x360

- **-Q, -i, --irq \<irq\>**

  Specify new interrupt. Valid values are: 3-5,9-12,15.

- **-w, --write-EEPROM \<values\>**

  Write to the EEPROMS with the specified values.

## SEE ALSO

[**mii-diag**(8)](/mii-diag/8.md)

## AUTHOR

This manual page was written by Alain Schroeder \<alain@debian.org\>, for the Debian GNU/Linux system (but may be used by others).