--- name: "dnf4.conf" section: "5" platform: "linux" package: "dnf" version: "4.24.0-2" release: "Arch Linux 2026-11-01" platforms: ["linux"] url: "https://new.carta.tech/dnf4.conf" --- # dnf4.conf(5) DNF Configuration Reference ## NAME dnf4.conf - DNF Configuration Reference ## DESCRIPTION DNF \ by default uses the global configuration file at **/etc/dnf/dnf.conf** and all \*.repo files found under **/etc/yum.repos.d**. The latter is typically used for repository configuration and takes precedence over global configuration. The configuration file has INI format consisting of section declaration and **name=value** options below each on separate line. There are two types of sections in the configuration files: main and repository. Main section defines all global configuration options and should be only one. The repository sections define the configuration for each (remote or local) repository. The section name of the repository in brackets serve as repo ID reference and should be unique across configuration files. The allowed characters of repo ID string are lower and upper case alphabetic letters, digits, **-**, **\_**, **.** and **:**. The minimal repository configuration file should aside from repo ID consists of baseurl, metalink or mirrorlist option definition. ## DISTRIBUTION-SPECIFIC CONFIGURATION Configuration options, namely best and skip\_if\_unavailable, can be set in the DNF configuration file by your distribution to override the DNF defaults. ## \[MAIN\] OPTIONS - **allow\_vendor\_change** boolean If disabled dnf will stick to vendor when upgrading or downgrading rpms. Default is **True** **Warning:** This option is currently not supported for *downgrade* and *distro-sync* commands - **arch** string The architecture used for installing packages. By default this is auto-detected. Often used together with ignorearch option. - **assumeno** boolean If enabled dnf will assume **No** where it would normally prompt for confirmation from user input. Default is **False**. - **assumeyes** boolean If enabled dnf will assume **Yes** where it would normally prompt for confirmation from user input (see also defaultyes). Default is **False**. - **autocheck\_running\_kernel** boolean Automatic check whether there is installed newer kernel module with security update than currently running kernel. Default is **True**. - **basearch** string The base architecture used for installing packages. By default this is auto-detected. - **best** boolean **True** instructs the solver to either use a package with the highest available version or fail. On **False**, do not fail if the latest version cannot be installed and go with the lower version. The default is **False**. Note this option in particular can be set in your configuration file by your distribution. Also note that the use of the highest available version is only guaranteed for the packages directly requested and not for their dependencies. - **cachedir** string Path to a directory used by various DNF subsystems for storing cache data. Has a reasonable root-writable default depending on the distribution. DNF needs to be able to create files and directories at this location. - **cacheonly** boolean If set to **True** DNF will run entirely from system cache, will not update the cache and will use it even in case it is expired. Default is **False**. API Notes: Must be set before repository objects are created. Plugins must set this in the pre\_config hook. Later changes are ignored. - **check\_config\_file\_age** boolean Specifies whether dnf should automatically expire metadata of repos, which are older than their corresponding configuration file (usually the dnf.conf file and the foo.repo file). Default is **True** (perform the check). Expire of metadata is also affected by metadata age. See also metadata\_expire. - **clean\_requirements\_on\_remove** boolean Remove dependencies that are no longer used during **dnf remove**. A package only qualifies for removal via **clean\_requirements\_on\_remove** if it was installed through DNF but not on explicit user request, i.e. it was pulled in as a dependency. The default is True. (installonlypkgs are never automatically removed.) - **config\_file\_path** string Path to the default main configuration file. Default is **/etc/dnf/dnf.conf**. - **debuglevel** integer Debug messages output level, in the range 0 to 10. The higher the number the more debug output is put to stdout. Default is 2. - **debug\_solver** boolean Controls whether the libsolv debug files should be created when solving the transaction. The debug files are created in the *./debugdata* directory. Default is **False**. - **defaultyes** boolean If enabled the default answer to user confirmation prompts will be **Yes**. Not to be confused with assumeyes which will not prompt at all. Default is **False**. - **diskspacecheck** boolean Controls whether rpm should check available disk space during the transaction. Default is **True**. - **errorlevel** integer Error messages output level, in the range 0 to 10. The higher the number the more error output is put to stderr. Default is 3. This is deprecated in DNF and overwritten by --verbose \<#verbose-options-label\> commandline option. - **exclude\_from\_weak** list Prevent installing packages as weak dependencies (recommends or supplements). The packages can be specified by a name or a glob and separated by a comma. Defaults to **\[\]**. - **exclude\_from\_weak\_autodetect** boolean If enabled, dnf will autodetect unmet weak dependencies (recommends or supplements) of packages installed on the system. Providers of these weak dependencies will not be installed by dnf as weak dependencies any more (they will still be installed if pulled in as a regular dependency). Defaults to **true**. - **exit\_on\_lock** boolean Should the dnf client exit immediately when something else has the lock. Default is **False**. - **gpgkey\_dns\_verification** boolean Should the dnf attempt to automatically verify GPG verification keys using the DNS system. This option requires the unbound python module (python3-unbound) to be installed on the client system. This system has two main features. The first one is to check if any of the already installed keys have been revoked. Automatic removal of the key is not yet available, so it is up to the user, to remove revoked keys from the system. The second feature is automatic verification of new keys when a repository is added to the system. In interactive mode, the result is written to the output as a suggestion to the user. In non-interactive mode (i.e. when -y is used), this system will automatically accept keys that are available in the DNS and are correctly signed using DNSSEC. It will also accept keys that do not exist in the DNS system and their NON-existence is cryptographically proven using DNSSEC. This is mainly to preserve backward compatibility. Default is **False**. - **group\_package\_types** list List of the following: optional, default, mandatory. Tells dnf which type of packages in groups will be installed when 'groupinstall' is called. Default is: **default, mandatory**. - **ignorearch** boolean If set to **True**, RPM will allow attempts to install packages incompatible with the CPU's architecture. Defaults to **False**. Often used together with arch option. - **installonlypkgs** list List of provide names of packages that should only ever be installed, never upgraded. Kernels in particular fall into this category. These packages are never removed by **dnf autoremove** even if they were installed as dependencies (see clean\_requirements\_on\_remove for auto removal details). This option append the list values to the default installonlypkgs list used by DNF. The number of kept package versions is regulated by installonly\_limit. - **installonly\_limit** integer Number of installonly packages allowed to be installed concurrently. Defaults to 3. The minimal number of installonly packages is 2. Value 0 means unlimited number of installonly packages. Value 1 is explicitly not allowed since it complicates kernel upgrades due to protection of the running kernel from removal. - **installroot** string The root of the filesystem for all packaging operations. It requires an absolute path. See also --installroot commandline option. - **install\_weak\_deps** boolean When this option is set to True and a new package is about to be installed, all packages linked by weak dependency relation (Recommends or Supplements flags) with this package will be pulled into the transaction. Default is **True**. - **keepcache** boolean Keeps downloaded packages in the cache when set to True. Even if it is set to False and packages have not been installed they will still persist until next successful transaction. The default is **False**. - **logdir** string Directory where the log files will be stored. Default is **/var/log**. - **logfilelevel** integer Log file messages output level, in the range 0 to 10. The higher the number the more debug output is put to logs. Default is 9. This option controls dnf.log, dnf.librepo.log and hawkey.log. Although dnf.librepo.log and hawkey.log are affected only by setting the logfilelevel to 10. - **log\_compress** boolean When set to **True**, log files are compressed when they are rotated. Default is **False**. - **log\_rotate** integer Log files are rotated **log\_rotate** times before being removed. If **log\_rotate** is **0**, the rotation is not performed. Default is **4**. - **log\_size** storage size Log files are rotated when they grow bigger than log\_size bytes. If log\_size is 0, the rotation is not performed. The default is 1 MB. Valid units are 'k', 'M', 'G'. The size applies for individual log files, not the sum of all log files. See also log\_rotate. - **metadata\_timer\_sync** time in seconds The minimal period between two consecutive **makecache timer** runs. The command will stop immediately if it's less than this time period since its last run. Does not affect simple **makecache** run. Use **0** to completely disable automatic metadata synchronizing. The default corresponds to three hours. The value is rounded to the next commenced hour. - **module\_obsoletes** boolean This option controls whether dnf should apply modular obsoletes when possible. Default is **False**. - **module\_platform\_id** string Set this to $name:$stream to override PLATFORM\_ID detected from **/etc/os-release**. It is necessary to perform a system upgrade and switch to a new platform. - **module\_stream\_switch** boolean This option controls whether it's possible to switch enabled streams of a module. Default is **False**. - **multilib\_policy** string Controls how multilib packages are treated during install operations. Can either be **"best"** (the default) for the depsolver to prefer packages which best match the system's architecture, or **"all"** to install packages for all available architectures. - **obsoletes** boolean This option only has affect during an install/update. It enables dnf's obsoletes processing logic, which means it makes dnf check whether any dependencies of given package are no longer required and removes them. Useful when doing distribution level upgrades. Default is 'true'. Command-line option: --obsoletes \<#obsoletes-option-label\> - **optional\_metadata\_types** list List of metadata types to be loaded in addition to **primary**, **modules**, **comps**, **updateinfo** and **presto**, which are loaded always. Note that the list can be extended by individual commands to explicitly request loading specific metadata type. Currently only **filelists** value is supported. Default is an empty list. - **persistdir** string Directory where DNF stores its persistent data between runs. Default is **"/var/lib/dnf"**. - **persistence** string Whether changes should persist across system reboots. Default is **auto**. Passing --transient \<#transient-option-label\> will override this setting to **transient**. Valid values are: - • **auto**: Changes will persist across reboots, unless the target is a running bootc system and the system is already in an unlocked state (i.e. **/usr** is writable). - • **transient**: Changes will be lost on the next reboot. Only applicable on bootc systems. Beware that changes to **/etc** and **/var** will persist, depending on the configuration of your bootc system. See also \. - • **persist**: Changes will persist across reboots. - **pluginconfpath** list List of directories that are searched for plugin configurations to load. All configuration files found in these directories, that are named same as a plugin, are parsed. The default path is **/etc/dnf/plugins**. - **pluginpath** list List of directories that are searched for plugins to load. Plugins found in *any of the directories* in this configuration option are used. The default contains a Python version-specific path. - **plugins** boolean Controls whether the plugins are enabled. Default is **True**. - **protected\_packages** list List of packages that DNF should never completely remove. They are protected via Obsoletes as well as user/plugin removals. The default is: **dnf**, **glob:/etc/yum/protected.d/\*.conf** and **glob:/etc/dnf/protected.d/\*.conf**. So any packages which should be protected can do so by including a file in **/etc/dnf/protected.d** with their package name in it. DNF will protect also the package corresponding to the running version of the kernel. See also protect\_running\_kernel option. - **protect\_running\_kernel** boolean Controls whether the package corresponding to the running version of kernel is protected from removal. Default is **True**. - **releasever** string Used for substitution of **$releasever** in the repository configuration. The **$releasever\_major** and **$releasever\_minor** variables will be automatically derived from **$releasever** by splitting it on the first **.**. For example, if **$releasever** is set to **1.23**, then **$releasever\_major** will be **1** and **$releasever\_minor** will be **23**. **$releasever\_major** and **$releasever\_minor** can also be set by the distribution. See also repo variables. - **reposdir** list DNF searches for repository configuration files in the paths specified by **reposdir**. The behavior of **reposdir** could differ when it is used along with --installroot option. - **rpmverbosity** string RPM debug scriptlet output level. One of: **critical**, **emergency**, **error**, **warn**, **info** or **debug**. Default is **info**. - **strict** boolean If disabled, all unavailable packages or packages with broken dependencies given to DNF command will be skipped without raising the error causing the whole operation to fail. Currently works for install command only. The default is True. - **tsflags** list List of strings adding extra flags for the RPM transaction. | | | | --- | --- | | tsflag value | RPM Transaction Flag | | noscripts | RPMTRANS\_FLAG\_NOSCRIPTS | | test | RPMTRANS\_FLAG\_TEST | | notriggers | RPMTRANS\_FLAG\_NOTRIGGERS | | nodocs | RPMTRANS\_FLAG\_NODOCS | | justdb | RPMTRANS\_FLAG\_JUSTDB | | nocontexts | RPMTRANS\_FLAG\_NOCONTEXTS | | nocaps | RPMTRANS\_FLAG\_NOCAPS | | nocrypto | RPMTRANS\_FLAG\_NOFILEDIGEST | | deploops | RPMTRANS\_FLAG\_DEPLOOPS | The **nocrypto** option will also set the **\_RPMVSF\_NOSIGNATURES** and **\_RPMVSF\_NODIGESTS** VS flags. The **test** option provides a transaction check without performing the transaction. It includes downloading of packages, gpg keys check (including permanent import of additional keys if necessary), and rpm check to prevent file conflicts. The **nocaps** is supported with rpm-4.14 or later. When **nocaps** is used but rpm doesn't support it, DNF only reports it as an invalid tsflag. - **upgrade\_group\_objects\_upgrade** boolean Set this to False to disable the automatic running of **group upgrade** when running the **upgrade** command. Default is **True** (perform the operation). - **usr\_drift\_protected\_paths** list List of paths that are likely to cause problems when their contents drift with respect to **/usr**, e.g. **/etc/pam.d/\***. If a transient transaction would modify these paths, DNF aborts the operation and prints an error. Supports globs. Defaults to **glob:/etc/dnf/usr-drift-protected-paths.d/\*.conf**. So a list of paths can be protected by creating a **.conf** file in **/etc/dnf/usr-drift-protected-paths.d/** containing one path (or glob pattern) per line. When using **persistence=transient** on bootc systems, a transient overlay is created on **/usr**, and any changes DNF makes to **/usr** will be discarded on reboot. However, other paths such as **/etc** and **/var** are (often) not backed by a transient overlay, so changes to them will persist across reboots. Usually, this "filesystem drift" is fine, but it can cause problems in certain situations. For example, a configuration file in **/etc** that's shared by multiple packages might reference a **.so** file under **/usr/lib64** that no longer exists. - **varsdir** list List of directories where variables definition files are looked for. Defaults to **"/etc/dnf/vars", "/etc/yum/vars"**. See variable files in Configuration reference. - **zchunk** boolean Enables or disables the use of repository metadata compressed using the zchunk format (if available). Default is **True**. ## \[MAIN\] OPTIONS - COLORS - **color** string Controls if DNF uses colored output on the command line. Possible values: "auto", "never", "always". Default is "auto". - **color\_list\_available\_downgrade** color Color of available packages that are older than installed packages. The option is used during list operations. Default is magenta. - **color\_list\_available\_install** color Color of packages that are available for installation and none of their versions in installed. The option is used during list operations. Default is bold,cyan. - **color\_list\_available\_reinstall** color Color of available packages that are identical to installed versions and are available for reinstalls. Default is bold,underline,green. The option is used during list operations. - **color\_list\_available\_upgrade** color Color of available packages that are newer than installed packages. Default is bold,blue. The option is used during list operations. - **color\_list\_installed\_extra** color Color of installed packages that do not have any version among available packages. The option is used during list operations. Default is bold,red. - **color\_list\_installed\_newer** color Color of installed packages that are newer than any version among available packages. The option is used during list operations. Default is bold,yellow. - **color\_list\_installed\_older** color Color of installed packages that are older than any version among available packages. The option is used during list operations. Default is yellow. - **color\_list\_installed\_reinstall** color Color of installed packages that are among available packages and can be reinstalled. The option is used during list operations. Default is cyan. - **color\_search\_match** color Color of patterns matched in search output. Default is bold,magenta. - **color\_update\_installed** color Color of removed packages. Default is red. This option is used during displaying transactions. - **color\_update\_local** color Color of local packages that are installed from the @commandline repository. This option is used during displaying transactions. Default is green. - **color\_update\_remote** color Color of packages that are installed/upgraded/downgraded from remote repositories. This option is used during displaying transactions. Default is bold,green. ## REPO OPTIONS - **baseurl** list List of URLs for the repository. Defaults to **\[\]**. URLs are tried in the listed order (equivalent to yum's "failovermethod=priority" behaviour). - **cost** integer The relative cost of accessing this repository, defaulting to 1000. This value is compared when the priorities of two repositories are the same. The repository with *the lowest cost* is picked. It is useful to make the library prefer on-disk repositories to remote ones. - **enabled** boolean Include this repository as a package source. The default is True. - **gpgkey** list of strings URLs of a GPG key files that can be used for signing metadata and packages of this repository, empty by default. If a file can not be verified using the already imported keys, import of keys from this option is attempted and the keys are then used for verification. - **metalink** string URL of a metalink for the repository. Defaults to **None**. - **mirrorlist** string URL of a mirrorlist for the repository. Defaults to **None**. - **module\_hotfixes** boolean Set this to True to disable module RPM filtering and make all RPMs from the repository available. The default is False. This allows user to create a repository with cherry-picked hotfixes that are included in a package set on a modular system. - **name** string A human-readable name of the repository. Defaults to the ID of the repository. - **priority** integer The priority value of this repository, default is 99. If there is more than one candidate package for a particular operation, the one from a repo with *the lowest priority value* is picked, possibly despite being less convenient otherwise (e.g. by being a lower version). - **type** string Type of repository metadata. Supported values are: **rpm-md**. Aliases for **rpm-md**: **rpm**, **repomd**, **rpmmd**, **yum**, **YUM**. ## SOURCE AND DEBUGINFO REPOSITORY NAMES For a given repository with an identifier in the form "\-rpms", its corresponding source repository is expected to have an identifier in the form "\-source-rpms" and debuginfo repository an identifier in the form "\-debug-rpms". Otherwise (if the repository identifier doesn't have the "-rpms" suffix), the source repository is expected to have an identifier in the form "\-source" and debuginfo repository an identifier in the form "\-debuginfo". For example, for repository "fedora", the source repository is "fedora-source" and debuginfo repository is "fedora-debuginfo". For repository "fedora-rpms", the source repository is "fedora-source-rpms" and debuginfo repository is "fedora-debug-rpms". ## REPO VARIABLES Right side of every repo option can be enriched by the following variables: **$arch** Refers to the system’s CPU architecture e.g, aarch64, i586, i686 and x86\_64. **$basearch** Refers to the base architecture of the system. For example, i686 and i586 machines both have a base architecture of i386, and AMD64 and Intel64 machines have a base architecture of x86\_64. **$releasever** Refers to the release version of operating system which DNF derives from information available in RPMDB. **$releasever\_major** Major version of **$releasever**, i.e. the component of **$releasever** occurring before the first **.**. **$releasever\_minor** Minor version of **$releasever**, i.e. the component of **$releasever** occurring after the first **.**. In addition to these hard coded variables, user-defined ones can also be used. They can be defined either via variable files, or by using special environmental variables. The names of these variables must be prefixed with DNF\_VAR\_ and they can only consist of alphanumeric characters and underscores: ``` $ DNF_VAR_MY_VARIABLE=value ``` To use such variable in your repository configuration remove the prefix. E.g.: ``` [myrepo] baseurl=https://example.site/pub/fedora/$MY_VARIABLE/releases/$releasever ``` Note that it is not possible to override the **arch** and **basearch** variables using either variable files or environmental variables. Although users are encouraged to use named variables, the numbered environmental variables **DNF0** - **DNF9** are still supported: ``` $ DNF1=value [myrepo] baseurl=https://example.site/pub/fedora/$DNF1/releases/$releasever ``` A limited form of shell-like parameter expansion is supported for variables. **${my\_variable:-word}** If **my\_variable** is unset or empty, then **word** will be substituted. Otherwise, the value of **my\_variable** will be substituted. **${my\_variable:+word}** If **my\_variable** is set and not empty, then **word** will be substituted. Otherwise, the empty string will be substituted. Parameter expansions can be nested up to a maximum depth of 32. For example: ``` ${my_defined_variable:+${my_undefined_variable:-foobar}} ``` will evaluate to **foobar**. ## OPTIONS FOR BOTH \[MAIN\] AND REPO Some options can be applied in either the main section, per repository, or in a combination. The value provided in the main section is used for all repositories as the default value, which repositories can then override in their configuration. - **bandwidth** storage size Total bandwidth available for downloading. Meaningful when used with the throttle option. Storage size is in bytes by default but can be specified with a unit of storage. Valid units are 'k', 'M', 'G'. - **countme** boolean When enabled, one (and only one) HTTP GET request for the metalink file will be selected at random every week to carry a special URL flag. This flag allows the repository provider to estimate the number of systems consuming the repository, by counting such requests over a week's time. This method is more accurate than just counting unique IP addresses (which is subject to both overcounting and undercounting due to short DHCP leases and NAT, respectively). This is *not* an out-of-band HTTP request made for this purpose alone. Only requests initiated by DNF during normal operation, such as to check for metadata updates, can get this flag. The flag is a simple "countme=N" parameter appended to the metalink URL where N is an integer representing the age "bucket" this system belongs to. Four buckets are defined, based on how many full weeks have passed since the installation of a system: | | | | --- | --- | | bucket | system age | | 1 | first week | | 2 | first month (2 - 4 weeks) | | 3 | first 6 months (5 - 24 weeks) | | 4 | more than 6 months (\> 24 weeks) | This number is meant to help distinguish short-lived (throwaway) machines from long-term installs and get a better picture of how systems are used over time. To determine a system's installation time ("epoch"), the **[machine-id(5)](/machine-id/5.md)** file's modification time is used as the single source of truth. This file is semantically tied to the system's lifetime as it's typically populated at installation time or during the first boot by an installer tool or init system (such as **[systemd(1)](/systemd/1.md)**), respectively, and remains unchanged. If the file is empty or missing (such as in containers), the time of the very first request made using the expanded metalink URL (i.e. with any repository variables such as **$releasever** substituted) that carried the flag is declared as the epoch. If no metalink URL is defined for this repository but a mirrorlist URL is, the latter is used for this purpose instead. Default is False. - **deltarpm** boolean When enabled, DNF will save bandwidth by downloading much smaller delta RPM files, rebuilding them to RPM locally. However, this is quite CPU and I/O intensive. Default is False. It requires */usr/bin/applydeltarpm* on the system. - **deltarpm\_percentage** integer When the relative size of delta vs pkg is larger than this, delta is not used. Default value is 75 (Deltas must be at least 25% smaller than the pkg). Use *0* to turn off delta rpm processing. Local repositories (with \ baseurl) have delta rpms turned off by default. - **enablegroups** boolean Determines whether DNF will allow the use of package groups for this repository. Default is True (package groups are allowed). - **excludepkgs** list Exclude packages of this repository, specified by a name or a glob and separated by a comma, from all operations. Can be disabled using **--disableexcludes** command line switch. Defaults to **\[\]**. - **fastestmirror** boolean If enabled, TCP socket latency is used to find the closest available mirror. A mirror is then selected at random with less than twice the lowest latency for load balancing purposes. This overrides the order provided by the mirrorlist/metalink file itself, and does not take into consideration mirrorlist parameters such as mirror bandwidth nor preferred mirrors for client IP addresses. - **gpgcheck** boolean Whether to perform GPG signature check on packages found in this repository. The default is False. This option can only be used to strengthen the active RPM security policy set with the **%\_pkgverify\_level** macro (see the **/usr/lib/rpm/macros** file for details). That means, if the macro is set to 'signature' or 'all' and this option is False, it will be overridden to True during DNF runtime, and a warning will be printed. To squelch the warning, make sure this option is True for every enabled repository, and also enable localpkg\_gpgcheck. - **includepkgs** list Include packages of this repository, specified by a name or a glob and separated by a comma, in all operations. Inverse of excludepkgs, DNF will exclude any package in the repository that doesn't match this list. This works in conjunction with **excludepkgs** and doesn't override it, so if you 'excludepkgs=\*.i386' and 'includepkgs=python\*' then only packages starting with python that do not have an i386 arch will be seen by DNF in this repo. Can be disabled using **--disableexcludes** command line switch. Defaults to **\[\]**. - **ip\_resolve** IP address type Determines how DNF resolves host names. Set this to '4'/'IPv4' or '6'/'IPv6' to resolve to IPv4 or IPv6 addresses only. By default, DNF resolves to either addresses. - **localpkg\_gpgcheck** boolean Whether to perform a GPG signature check on local packages (packages in a file, not in a repository). The default is False. This option is subject to the active RPM security policy (see gpgcheck for more details). - **max\_parallel\_downloads** integer Maximum number of simultaneous package downloads. Defaults to 3. Maximum of 20. - **metadata\_expire** time in seconds The period after which the remote repository is checked for metadata update and in the positive case the local metadata cache is updated. The default corresponds to 48 hours. Set this to **-1** or **never** to make the repo never considered expired. Expire of metadata can be also triggered by change of timestamp of configuration files (**dnf.conf**, **\.repo**). See also check\_config\_file\_age. - **minrate** storage size This sets the low speed threshold in bytes per second. If the server is sending data at the same or slower speed than this value for at least timeout option seconds, DNF aborts the connection. The default is 1000. Valid units are 'k', 'M', 'G'. - **password** string The password to use for connecting to a repository with basic HTTP authentication. Empty by default. - **proxy** string URL of a proxy server to connect through. Set to an empty string in the repository configuration to disable proxy setting inherited from the main section. The expected format of this option is **\://\\[:port\]**. (For backward compatibility, '\_none\_' can be used instead of the empty string.) Note: The curl environment variables (such as **http\_proxy**) are effective if this option is unset (or '\_none\_' is set in the repository configuration). See the **curl** man page for details. - **proxy\_username** string The username to use for connecting to the proxy server. Empty by default. - **proxy\_password** string The password to use for connecting to the proxy server. Empty by default. - **proxy\_auth\_method** string The authentication method used by the proxy server. Valid values are | | | | --- | --- | | method | meaning | | basic | HTTP Basic authentication | | digest | HTTP Digest authentication | | negotiate | HTTP Negotiate (SPNEGO) authentication | | ntlm | HTTP NTLM authentication | | digest\_ie | HTTP Digest authentication with an IE flavor | | ntlm\_wb | NTLM delegating to winbind helper | | none | None auth method | | any | All suitable methods | Defaults to **any** - **proxy\_sslcacert** string Path to the file containing the certificate authorities to verify proxy SSL certificates. Empty by default - uses system default. - **proxy\_sslverify** boolean When enabled, proxy SSL certificates are verified. If the client can not be authenticated, connecting fails and the repository is not used any further. If **False**, SSL connections can be used, but certificates are not verified. Default is **True**. - **proxy\_sslclientcert** string Path to the SSL client certificate used to connect to proxy server. Empty by default. - **proxy\_sslclientkey** string Path to the SSL client key used to connect to proxy server. Empty by default. - **repo\_gpgcheck** boolean Whether to perform GPG signature check on this repository's metadata. The default is False. Note that GPG keys for this check are stored separately from GPG keys used in package signature verification. Furthermore, they are also stored separately for each repository. This means that dnf may ask to import the same key multiple times. For example, when a key was already imported for package signature verification and this option is turned on, it may be needed to import it again for the repository. - **retries** integer Set the number of total retries for downloading packages. The number is accumulative, so e.g. for *retries=10*, dnf will fail after any package download fails for eleventh time. Setting this to *0* makes dnf try forever. Default is *10*. - **skip\_if\_unavailable** boolean If enabled, DNF will continue running and disable the repository that couldn't be synchronized for any reason. This option doesn't affect skipping of unavailable packages after dependency resolution. To check inaccessibility of repository use it in combination with refresh command line option \<#refresh-command-label\>. The default is **False**. Note this option in particular can be set in your configuration file by your distribution. - **sslcacert** string Path to the file containing the certificate authorities to verify SSL certificates. Empty by default - uses system default. - **sslverify** boolean When enabled, remote SSL certificates are verified. If the client can not be authenticated, connecting fails and the repository is not used any further. If **False**, SSL connections can be used, but certificates are not verified. Default is **True**. - **sslverifystatus** boolean When enabled, revocation status of the server certificate is verified using the "Certificate Status Request" TLS extension (aka. OCSP stapling). Default is **False**. - **sslclientcert** string Path to the SSL client certificate used to connect to remote sites. Empty by default. - **sslclientkey** string Path to the SSL client key used to connect to remote sites. Empty by default. - **throttle** storage size Limits the downloading speed. It might be an absolute value or a percentage, relative to the value of the bandwidth option option. **0** means no throttling (the default). The absolute value is in bytes by default but can be specified with a unit of storage. Valid units are 'k', 'M', 'G'. - **timeout** time in seconds Number of seconds to wait for a connection before timing out. Used in combination with minrate option option. Defaults to 30 seconds. - **username** string The username to use for connecting to repo with basic HTTP authentication. Empty by default. - **user\_agent** string The User-Agent string to include in HTTP requests sent by DNF. Defaults to ``` libdnf (NAME VERSION_ID; VARIANT_ID; OS.BASEARCH) ``` where NAME, VERSION\_ID and VARIANT\_ID are OS identifiers read from the **[os-release(5)](/os-release/5.md)** file, and OS and BASEARCH are the canonical OS name and base architecture, respectively. Example: ``` libdnf (Fedora 31; server; Linux.x86_64) ``` ## TYPES OF OPTIONS - **boolean** This is a data type with only two possible values. One of following options can be used: 1, 0, True, False, yes, no - **integer** It is a whole number that can be written without a fractional component. - **list** It is an option that could represent one or more strings separated by space or comma characters. - **string** It is a sequence of symbols or digits without any whitespace character. - **color** A string describing color and modifiers separated with a comma, for example "red,bold". - • Colors: black, blue, cyan, green, magenta, red, white, yellow - • Modifiers: bold, blink, dim, normal, reverse, underline ## FILES - **Cache Files** /var/cache/dnf - **Main Configuration File** /etc/dnf/dnf.conf - **Repository** /etc/yum.repos.d/ - **Variables** Any properly named file in /etc/dnf/vars is turned into a variable named after the filename (or overrides any of the above variables but those set from commandline). Filenames may contain only alphanumeric characters and underscores and be in lowercase. Variables are also read from /etc/yum/vars for YUM compatibility reasons. ## SEE ALSO - • **[dnf(8)](/dnf/8.md)**, DNF Command Reference \<#command-ref-label\> ## Author See AUTHORS in DNF source distribution. ## Copyright 2012-2020, Red Hat, Licensed under GPLv2+