NAME
capiinit - start or stop CAPI-capable ISDN cards
SYNOPSIS
capiinit [OPTIONS] start | stop | show | status | prepare | reload | activate | deactivate
capiinit [OPTIONS] activate|deactivate cardname
capiinit [OPTIONS] activate|deactivate driver [cardname]
DESCRIPTION
capiinit is called with one of the following actions:
- start
-
Load all modules and initialize all cards (loading the firmware), which are configured in /etc/capi.conf.
- stop
-
Reset all cards and unload modules.
- show
-
Show the current configuration.
- status
-
Show the current status.
- prepare
-
Load all modules.
- activate
-
Initialize all cards.
- activate cardname
-
Initialize one card (i.e.: c4-ec00).
- activate driver [cardnumber]
-
Initialize one card.
- deactivate
-
Reset all cards.
- deactivate cardname
-
Reset one card (i.e.: c4-ec00).
- deactivate driver [cardnumber]
-
Reset one card.
- reload
-
Reset all cards and initialize them again.
Firmware files are searched in this order in the following directories: /usr/share/isdn/`uname -r`, /usr/share/isdn, /usr/lib/isdn, /lib/isdn.
There is a sample config in /etc/capi.conf.
OPTIONS
- -c filename, --config filename
-
Use filename as config file (default is /etc/capi.conf).
- -d, --debug
-
Save patch values for debugging purposes.
- -s, --silent
-
Don't show status information.
AUTHOR
Manpage written from C source by Paul Slootman <[email protected]>, updated by Matthias Klose <[email protected]>.