---
name: "bus_alloc_resource_any"
section: "9"
platform: "linux"
package: "freebsd-manpages"
version: "6.0-5"
release: "Debian 4.0 (Etch)"
platforms: ["linux", "freebsd"]
url: "https://new.carta.tech/bus_alloc_resource_any"
---

# bus\_alloc\_resource\_any(9)

allocate resources from a parent bus

## NAME

**bus\_alloc\_resource**, **bus\_alloc\_resource\_any** – allocate resources from a parent bus

## SYNOPSIS

**#include \<sys/param.h\>**

**#include \<sys/bus.h\>**

**#include \<machine/bus.h\>**

**#include \<sys/rman.h\>**

**#include \<machine/resource.h\>**

*struct* *resource* *\**\

**bus\_alloc\_resource**(*device\_t dev*, *int type*, *int \*rid*, *u\_long start*, *u\_long end*, *u\_long count*, *u\_int flags*);

*struct* *resource* *\**\

**bus\_alloc\_resource\_any**(*device\_t dev*, *int type*, *int \*rid*, *u\_int flags*);

## DESCRIPTION

This is an easy interface to the resource-management functions. It hides the indirection through the parent's method table. This function generally should be called in attach, but (except in some rare cases) never earlier.

The **bus\_alloc\_resource\_any**() function is a convenience wrapper for **bus\_alloc\_resource**(). It sets the values for *start*, *end*, and *count* to the default resource (see description of *start* below).

The arguments are as follows:

-

  *dev* is the device that requests ownership of the resource. Before allocation, the resource is owned by the parent bus.

-

  *type* is the type of resource you want to allocate. It is one of:

  - SYS\_RES\_IRQ

    for IRQs

  - SYS\_RES\_DRQ

    for ISA DMA lines

  - SYS\_RES\_IOPORT

    for I/O ports

  - SYS\_RES\_MEMORY

    for I/O memory

-

  *rid* points to a bus specific handle that identifies the resource being allocated. For ISA this is an index into an array of resources that have been setup for this device by either the PnP mechanism, or via the hints mechanism. For PCCARD, similar things are used as of writing, but that may change in the future with newcard. For PCI it just happens to be the offset into pci config space which has a word that describes the resource. The bus methods are free to change the RIDs that they are given as a parameter. You must not depend on the value you gave it earlier.

-

  *start* and *end* are the start/end addresses of the resource. If you specify values of 0ul for *start* and ~0ul for *end* and 1 for *count*, the default values for the bus are calculated.

-

  *count* is the size of the resource. For example, the size of an I/O port is usually 1 byte (but some devices override this). If you specified the default values for *start* and *end*, then the default value of the bus is used if *count* is smaller than the default value and *count* is used, if it is bigger than the default value.

-

  *flags* sets the flags for the resource. You can set one or more of these flags:

  - RF\_ALLOCATED

    resource has been reserved. The resource still needs to be activated with [bus\_activate\_resource(9)](/bus_activate_resource/9.md).

  - RF\_ACTIVE

    activate resource atomically.

  - RF\_SHAREABLE

    resource permits contemporaneous sharing. It should always be set unless you know that the resource cannot be shared. It is the bus driver's task to filter out the flag if the bus does not support sharing. For example, [pccard(4)](/pccard/4.md) cannot share IRQs while [cardbus(4)](/cardbus/4.md) can.

  - RF\_TIMESHARE

    resource permits time-division sharing.

## RETURN VALUES

A pointer to *struct* *resource* is returned on success, a null pointer otherwise.

## EXAMPLES

This is some example code that allocates a 32 byte I/O port range and an IRQ. The values of *portid* and *irqid* should be saved in the softc of the device after these calls.

```
	struct resource *portres, irqres;
	int portid, irqid;
	portid = 0;
	irqid = 0;
	portres = bus_alloc_resource(dev, SYS_RES_IOPORT, &portid,
			0ul, ~0ul, 32, RF_ACTIVE);
	irqres = bus_alloc_resource_any(dev, SYS_RES_IRQ, &irqid,
			RF_ACTIVE | RF_SHAREABLE);
```

## SEE ALSO

[bus\_activate\_resource(9)](/bus_activate_resource/9.md), [bus\_release\_resource(9)](/bus_release_resource/9.md), [device(9)](/device/9.md), [driver(9)](/driver/9.md)

## AUTHORS

This manual page was written by Alexander Langer ⟨alex@big.endian.de⟩ with parts by Warner Losh ⟨imp@FreeBSD.org⟩.