bs11_config(1)

Usage

bs11_config [options] [command]

bs11_config is a small commandline program that can be used to configure the BS-11? BTS using its RS232 link.

It can perform a subset of the functions that are typically performed using the Siemens LMT (Local Maintenance Terminal) software, such as

`-`	querying some essential configuration values
`-`	creating and deleting TRX1 objects
`-`	download of SAFETY LOAD software
`-`	download of BTS software
`-`	creating an initial configuration (such as creating BBSIG,CCLK,PA,... objects)
`-`	setting the Tx output power of the RF amplifier

It is part of the OpenBSC base station controller software from Osmocom.

`query`	Query the BS-11 about serial number and configuration
`disconnect`	Disconnect A-bis link (go into administrative state)
`resconnect`	Reconnect A-bis link (go into normal state)
`restart`	Restart the BTS
`software`	Download Software (only in administrative state)
`create-trx1`	Create objects for TRX1 (Danger: Your BS-11 might overheat)
`delete-trx1`	Delete objects for TRX1
`pll-e1-locked`	Set the PLL to be locked to E1 clock
`pll-standalone`	Set the PLL to be in standalone mode
`pll-setvalue <value>`	Set the PLL set value
`pll-workvalue <value>`	Set the PLL work value
`oml-tei`	Set OML E1 TS and TEI
`bport0-star`	Set BPORT0 line config to star
`bport0-multidrop`	Set BPORT0 line config to multidrop
`bport1-multidrop`	Set BPORT1 line config to multidrop
`create-bport1`	Create BPORT1 object
`delete-bport1`	Delete BPORT1 object

5 releases since Debian 9 (Stretch); the text changed 4 times.