---
name: "bs11_config"
section: "1"
platform: "linux"
package: "osmo-bsc-bs11-utils"
version: "1.13.0-2"
release: "Debian 13 (Trixie)"
platforms: ["linux"]
url: "https://new.carta.tech/bs11_config"
---

# bs11\_config(1)

Configuration of BS-11 BTS via RS232

## NAME

**bs11\_config** - Configuration of BS-11 BTS via RS232

## SYNOPSIS

```
bs11_config [options] [command]
```

## DESCRIPTION

**bs11\_config is a small commandline program that can be used to configure the BS-11? BTS using its RS232 link.**

**It can perform a subset of the functions that are typically performed using the Siemens LMT (Local Maintenance Terminal) software, such as**

- **-**

  **querying some essential configuration values**

- **-**

  **creating and deleting TRX1 objects**

- **-**

  **download of SAFETY LOAD software**

- **-**

  **download of BTS software**

- **-**

  **creating an initial configuration (such as creating BBSIG,CCLK,PA,... objects)**

- **-**

  **setting the Tx output power of the RF amplifier**

**It is part of the OpenBSC base station controller software from Osmocom.**

## OPTIONS

- **-h,--help**

  **Print this help text**

- **-p,--port \</dev/ttyXXX\>**

  **Specify serial port**

- **-s,--software \<file\>**

  **Specify Software file**

- **-S,--safety \<file\>**

  **Specify Safety Load file**

- **-d,--delay \<ms\>**

  **Specify delay in milliseconds**

- **-D,--disconnect**

  **Disconnect BTS from BSC**

- **-w,--win-size \<num\>**

  **Specify Window Size**

- **-f,--forced**

  **Force Software Load**

## SUPPORTED COMMANDS

- **query**

  **Query the BS-11 about serial number and configuration**

- **disconnect**

  **Disconnect A-bis link (go into administrative state)**

- **resconnect**

  **Reconnect A-bis link (go into normal state)**

- **restart**

  **Restart the BTS**

- **software**

  **Download Software (only in administrative state)**

- **create-trx1**

  **Create objects for TRX1 (Danger: Your BS-11 might overheat)**

- **delete-trx1**

  **Delete objects for TRX1**

- **pll-e1-locked**

  **Set the PLL to be locked to E1 clock**

- **pll-standalone**

  **Set the PLL to be in standalone mode**

- **pll-setvalue \<value\>**

  **Set the PLL set value**

- **pll-workvalue \<value\>**

  **Set the PLL work value**

- **oml-tei**

  **Set OML E1 TS and TEI**

- **bport0-star**

  **Set BPORT0 line config to star**

- **bport0-multidrop**

  **Set BPORT0 line config to multidrop**

- **bport1-multidrop**

  **Set BPORT1 line config to multidrop**

- **create-bport1**

  **Create BPORT1 object**

- **delete-bport1**

  **Delete BPORT1 object**

## SEE ALSO

**[isdnsync(1)](/isdnsync/1.md), [osmo-bsc(1)](/osmo-bsc/1.md)**

## AUTHOR

**This manual page was written by Ruben Undheim \<ruben.undheim@gmail.com\> for the Debian project (and may be used by others).**