bootpc8

Usage

Overview

This manual page documents briefly the bootpc command. This manual page was written for the Debian GNU/Linux distribution (but may be used by others), because the original program does not have a manual page.

bootpc is a boot protocol client used to grab the machine's IP address, set up DNS nameservers and other useful information.

Options

--bootfile file

Tell the server to use file as the boot file.

--dev device

Use device to communicate with the server.

--verbose

Be verbose.

--debug

Produce debugging output.

--server addr

Use the IP address addr to communicate with the server.

--hwaddr addr

Use addr as our hardware address rather than what the operating system gives us.

--returniffail

Terminate the program if a failure occurs. By default bootpc will ask the user to press a key if the request did not succeed.

--waitformore length

Wait for more responses when one is received. bootpc will wait for at most length seconds. This is probably only useful for debugging.

--in2host addr

Takes an address and returns useful bits of the name after lookup, this was a separate program, but it is more compact to have both together.

--serverbcast

Tell the server to send back a broadcast reply. This is necessary on Linux 2.1 and 2.2.

--help

Display the usage of bootpc.