bgcode1

Usage

Overview

bgcode converts textual gcode files into binary gcode, as used by Prusa 3D printers.

Options

--checksum=CHECKSUM

Checksum algorithm to use. Valid values for CHECKSUM are 0 for no checksum and 1 for CRC32 (default).

--file_metadata_compression=COMPRESSION

Compression algorithm to use for file metadata. Valid values for COMPRESSION are: 0 for None (default), 1 for Deflate, 2 for Heatshrink_11_4, and 3 for Heatshrink_12_4.

--print_metadata_compression=COMPRESSION

Compression algorithm to use for print metadata. Valid values for COMPRESSION are: 0 for None (default), 1 for Deflate, 2 for Heatshrink_11_4, and 3 for Heatshrink_12_4.

--printer_metadata_compression=COMPRESSION

Compression algorithm to use for printer metadata. Valid values for COMPRESSION are: 0 for None (default), 1 for Deflate, 2 for Heatshrink_11_4, and 3 for Heatshrink_12_4.

--slicer_metadata_compression=COMPRESSION

Compression algorithm to use for slicer metadata. Valid values for COMPRESSION are: 0 for None (default), 1 for Deflate, 2 for Heatshrink_11_4, and 3 for Heatshrink_12_4.

--gcode_compression=COMPRESSION

Compression algorithm to use for G-code. Valid values for COMPRESSION are: 0 for None (default), 1 for Deflate, 2 for Heatshrink_11_4, and 3 for Heatshrink_12_4.

--gcode_encoding=GCODE_ENCODING

Encoding format to use for G-code. Valid values for GCODE_ENCODING are 0 for None (default), 1 for MeatPack, and 2 for MeatPackComments.

--metadata_encoding=METADATA_ENCODING

Encoding format to use for metadata. The only available value for this is 0 for INI (default).