atlantic-setup8
Setup program for ethernet cards based on at/lantic dp83905 chips.
Usage
atlantic-setup [options]
Overview
atlantic-setup is a setup and diagnostic program for ISA NE2000 Ethernet adapters. It has specific support for configuring the National Semiconductor AT/LANTIC DP83905 used in on ISA Ethernet adapters such as the NE2000plus. It also works several work-alike chips from other vendors.
Options
These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below.
-
-h, --help -
Show summary of options.
-
-V, --version -
Show version of program.
-
-v, --verbose -
Verbose mode.
-
-q, --quiet -
Be very unverbose.
-
-a, --all -
Print all registers.
-
-N, --NE2000 -
Set card to NE2000 mode.
-
-W, --wd8013 -
Set card to WD8013 mode.
-
-p, --base-address <port> -
Specify port to use. Valid values are: 0x240, 0x280, 0x300, 0x320, 0x340, 0x360 (default: 0x300).
-
-P, --new_ioport <port> -
Set card to use new port. Valid values are: 0x240, 0x280, 0x300, 0x320, 0x340, 0x360 (default: 0x300).
-
-F, --interface <interface> -
Interface number. Valid Options are: 10baseT, 10base2, 10base5, AUI.
-
-Q, -i, --irq <irq> -
Specify new interrupt. Valid values are: 3-5,9-12,15.
-
-w, --write-EEPROM <values> -
Write to the EEPROMS with the specified values.