---
name: "atlantic-setup"
section: "8"
platform: "linux"
package: "nictools-nopci"
version: "1.3.3-1"
release: "Debian 6.0 (Squeeze)"
platforms: ["linux"]
url: "https://new.carta.tech/atlantic-setup"
---

# atlantic-setup(8)

Setup program for ethernet cards based on AT/LANTIC DP83905 chips.

## NAME

atlantic-setup - Setup program for ethernet cards based on AT/LANTIC DP83905 chips.

## SYNOPSIS

**atlantic-setup** \[*options*\]

## DESCRIPTION

**atlantic-setup** is a setup and diagnostic program for ISA NE2000 Ethernet adapters. It has specific support for configuring the National Semiconductor AT/LANTIC DP83905 used in on ISA Ethernet adapters such as the NE2000plus. It also works several work-alike chips from other vendors.

## OPTIONS

These programs follow the usual GNU command line syntax, with long options starting with two dashes (\`-'). A summary of options is included below.

- **-h, --help**

  Show summary of options.

- **-V, --version**

  Show version of program.

- **-v, --verbose**

  Verbose mode.

- **-q, --quiet**

  Be very unverbose.

- **-a, --all**

  Print all registers.

- **-N, --NE2000**

  Set card to NE2000 mode.

- **-W, --wd8013**

  Set card to WD8013 mode.

- **-p, --base-address \<port\>**

  Specify port to use. Valid values are: 0x240, 0x280, 0x300, 0x320, 0x340, 0x360 (default: 0x300).

- **-P, --new\_ioport \<port\>**

  Set card to use new port. Valid values are: 0x240, 0x280, 0x300, 0x320, 0x340, 0x360 (default: 0x300).

- **-F, --interface \<interface\>**

  Interface number. Valid Options are: 10baseT, 10base2, 10base5, AUI.

- **-Q, -i, --irq \<irq\>**

  Specify new interrupt. Valid values are: 3-5,9-12,15.

- **-w, --write-EEPROM \<values\>**

  Write to the EEPROMS with the specified values.

## SEE ALSO

[**mii-diag**(8)](/mii-diag/8.md)

## AUTHOR

This manual page was written by Alain Schroeder \<alain@debian.org\>, for the Debian GNU/Linux system (but may be used by others).