---
name: "arv-tool-0.8"
section: "1"
platform: "linux"
package: "aravis-tools-cli"
version: "0.8.34-1"
release: "Debian 13 (Trixie)"
platforms: ["linux"]
url: "https://new.carta.tech/arv-tool-0.8"
---

# arv-tool-0.8(1)

manual page for arv-tool-0.8 0.8.23

## NAME

arv-tool-0.8 - manual page for arv-tool-0.8 0.8.23

## DESCRIPTION

### Usage:

- arv-tool-0.8 \[OPTION?\]

  command \<parameters\>

Small utility for basic control of a Genicam device.

### Help Options:

- **-h**, **--help**

  Show help options

### Application Options:

**-n**, **--name=**\<pattern\>

**-a**, **--address=**\<device\_address\>

- **--register-cache=**{disable\|enable\|debug}

  Register cache policy

- **--range-check=**{disable\|enable\|debug}

  Range check policy

- **--access-check=**{disable\|enable}

  Feature access check policy

- **-t**, **--time**

  Show execution time

**-d**, **--debug=**{\<category\>\[:\<level\>\]\[,...\]\|help}

- **-v**, **--version**

  Show version

Command may be one of the following possibilities:

- genicam:

  dump the content of the Genicam xml data

- features:

  list all features

- values:

  list all available feature values

- description \[\<feature\>\] ...:

  show the full feature description

- control \<feature\>\[=\<value\>\] ...:

  read/write device features

- network \<setting\>\[=\<value\>\]...:

  read/write network settings

If no command is given, this utility will list all the available devices. For the control command, direct access to device registers is provided using a R\[address\] syntax in place of a feature name.

## EXAMPLES

arv-tool-0.8 control Width=128 Height=128 Gain R\[0x10000\]=0x10 arv-tool-0.8 features arv-tool-0.8 description Width Height arv-tool-0.8 network mode=PersistentIP arv-tool-0.8 network ip=192.168.0.1 mask=255.255.255.0 gateway=192.168.0.254 arv-tool-0.8 -n Basler-210ab4 genicam