NAME
airspyhf_rx - probe device and show configuration
DESCRIPTION
The AirspyHF is a tiny and efficient software defined radio receiver.
This application lets the user probe the device and show configuration.
SYNOPSIS
airspy_rx
OPTIONS
Usage:
- -r <filename>
-
Receive data into the file; stdout emits values on standard output
- -s <serial number>
-
Open device with specified 64bits serial number
- -f <frequency>
-
Set frequency in MHz between 9 kHz - 31 MHz or 60 - 260 MHz
- -a <sample_rate>
-
Set sample rate, at the moment only 768 kS/s supported
- -n <#samples>
-
Number of samples to transfer (default is unlimited)
- -d
-
Verbose mode
- -w
-
Receive data into file with WAV header and automatic name This is for SDR# compatibility and may not work with other software It works even with HDSDR
- -g on|off
-
HF AGC on / off
- -l high|low
-
HF AGC threshold high / low (when AGC On)
- -t <value>
-
HF attenuator value 0..8 (each step increases 6 dB the attenuation)
- -m on|off
-
on to activate LNA (preamplifier): +6 dB gain - compensated in digital.
- -z
-
Do not attempt to use manual AGC/LNA commands (useful in order to avoid errors with old firmware)
SEE ALSO
AirspyHF web page: https://airspy.com/airspy-hf-plus
Other airspyhf programs:
airspyhf_rx(1), airspyhf_gpio(1), airspyhf_lib_version(1), airspyhf_rx(1)
AUTHOR
This manual page was written by Maitland Bottoms for the Debian project (but may be used by others).
COPYRIGHT
Copyright (c) 2020 A. Maitland Bottoms <[email protected]>
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.