NAME
LimeUtil - control and update LMS7 based transceiver devices
SYNOPSIS
LimeUtil [OPTIONS]
DESCRIPTION
LimeUtil is a tool to show information about and control LMS7 based transceiver devices such as the LimeSDR. It can be used to update the firmware and to calibrate the device.
OPTIONS
- --help
-
Print a help message.
- --info
-
Print information about LimeSuite and found devices.
- --find[="SPEC"]
-
Discover available devices, restricted to those matching the SPEC if given. If no matching devices are found it will exit with exit status 1.
- --make[="SPEC"]
-
Create a device instance.
Advanced options
- --args[="ARGS"]
-
Supply arguments ARGS to the --update, --fpga and --fw options.
- --update
-
Download latest firmware and program it into the device flash memory.
- --fpga="FILE"
-
Program FPGA firmware image in FILE to device flash memory.
- --fw="FILE"
-
Program FX3 firmware image in FILE to device flash memory.
- --timing
-
Time interfaces and operations.
Calibrations sweep
- --cal[="ARGS"]
-
Calibrate device. Use ARGS to select and configure device.
- --start=FREQ
-
Start calibration sweep at frequency FREQ Hz.
- --stop=FREQ
-
Stop calibration sweep at frequency FREQ Hz.
- --step=STEP
-
Step frequency during calibration sweep by STEP Hz (default 1 MHz).
- --bw=BW
-
Set calibration bandwidth to BW Hz (default 30 MHz).
- --dir=DIR
-
Set calibration direction to DIR (one of RX, TX or BOTH, default is BOTH).
- --chans=CHANNELS
-
Set calibration channels to CHANNELS (one of 0, 1 or ALL, default is ALL).
HOMEPAGE
LimeUtil is part of the Lime Suite ⟨https://myriadrf.org/projects/lime-suite/⟩.