--- name: "EDS" section: "3" platform: "linux" package: "owfs-doc" version: "3.2p4+dfsg1-6" release: "Debian 13 (Trixie)" platforms: ["linux"] url: "https://new.carta.tech/EDS" --- # EDS(3) Embedded Data Systems Sensors ## NAME EDS - Embedded Data Systems Sensors - **EDS0064** \- Temperature - **EDS0065** \- Temperature and Humidity - **EDS0066** \- Temperature and Barometric Pressure - **EDS0067** \- Temperature and Light - **EDS0068** \- Temperature, Barometric Pressure and Light - **EDS0070** \- Vibration - **EDS0071** \- RTD 4-wire temperature - **EDS0072** \- RTD 3-wire temperature - **EDS0080** \- 8 Channel Analog Current Input - **EDS0082** \- 8 Channel Analog Voltage Input - **EDS0083** \- 4 Channel Analog Current Input - **EDS0085** \- 4 Channel Analog Voltage Input - **EDS0090** \- 8 Discrete I/O ## SYNOPSIS **Embedded Data Systems** microprocessor-based sensors ### Sub-type ( all ) **7E** \[.\]XXXXXXXXXXXX\[XX\]\[/\[ **device\_id** \| **device\_type** \| **tag** \]\] ### Memory ( all ) **7E** \[.\]XXXXXXXXXXXX\[XX\]\[/\[ **memory** \| **pages/page.\[0-2\|ALL\]** \]\] ### Standard ( all ) **7E** \[.\]XXXXXXXXXXXX\[XX\]\[/\[ **address** **\|** **crc8** \| **id** \| **locator** \| **r\_address** \| **r\_id** \| **r\_locator** \| **type** \]\] ### Temperature ( EDS0064/5/6/7/8 ) **7E.XXXXXXXXXXXX/EDS006X** \[/\[ **temperature** \| **counters/seconds** \| **alarm/temp\_\[hi\|low\]** \| **alarm/clear** \| **set\_alarm/temp\_\[hi\|low\]** \| **threshold/temp\_\[hi\|low\]** \]\] ### Humidity ( EDS0065/8 ) **7E.XXXXXXXXXXXX/EDS006X** \[/\[ **humidity** \| **humidex** \| **dew\_point** \| **heat\_index** \| **alarm/humidity\_\[hi\|low\]** \| **alarm/humidex\_\[hi\|low\]** \| **alarm/dew\_point\_\[hi\|low\]** \| **alarm/heat\_index\_\[hi\|low\]** \| **alarm/clear** \| **set\_alarm/humidity\_\[hi\|low\]** \| **set\_alarm/humidex\_\[hi\|low\]** \| **set\_alarm/dew\_point\_\[hi\|low\]** \| **set\_alarm/heat\_index\_\[hi\|low\]** \| **threshold/humidity\_\[hi\|low\]** \|\ **threshold/humidex\_\[hi\|low\]** \| **threshold/dew\_point\_\[hi\|low\]** \| **threshold/heat\_index\_\[hi\|low\]** \]\] ### Barometric Pressure ( EDS0066/8 ) **7E.XXXXXXXXXXXX/EDS006X** \[/\[ **pressure** \| **inHg** \| **alarm/pressure\_\[hi\|low\]** \| **alarm/inHg\_\[hi\|low\]** \| **alarm/clear** \| **set\_alarm/pressure\_\[hi\|low\]** \| **set\_alarm/inHg\_\[hi\|low\]** \| **threshold/pressure\_\[hi\|low\]** \| **threshold/inHg\_\[hi\|low\]** \]\] ### Light ( EDS0067/8 ) **7E.XXXXXXXXXXXX/EDS006X** \[/\[ **light** \| **alarm/light\_\[hi\|low\]** \| **alarm/clear** \| **set\_alarm/light\_\[hi\|low\]** \| **threshold/light\_\[hi\|low\]** \]\] ### Vibration ( EDS0070 ) **7E.XXXXXXXXXXXX/EDS0070** \[/\[ **vib\_level** \| **vib\_peak** \| **vib\_min** \| **vib\_max** \| **counter/seconds** \| **alarm/vib\_\[hi\|low\]** \| **alarm/clear** \| **set\_alarm/vib\_\[hi\|low\]** \| **threshold/vib\_\[hi\|low\]** \]\] ### RTD Temperature ( EDS0071/2 ) **7E.XXXXXXXXXXXX/EDS007X** \[/\[ **temperature** \| **resistance** \| **raw** \| **delay** \| **user\_byte** \| **calibration/\[key\|constant\]** \| **counter/\[seconds\|samples\]** \| **alarm/temp\_\[hi\|low\]** \| **alarm/RTD\_\[hi\_low\]** \| **alarm/clear** \| **set\_alarm/temp\_\[hi\|low\]** \| **set\_alarm/RTD\_\[hi\_low\]** \| **threshold/temp\_\[hi\|low\]** \| **threshold/RTD\_\[hi\_low\]** \]\] ### Analog Current ( EDS0080 \[0-7\] EDS0083 \[0-3\] ) **7E.XXXXXXXXXXXX/EDS0080** \[/\[ **current.\[0-7\|ALL\]** \| **max\_current.\[0-7\|ALL\]** \| **min\_current.\[0-7\|ALL\]** \| **threshold/current\_hi.\[0-7\|ALL\]** \| **threshold/current\_low.\[0-7\|ALL\]** \| **alarm/current\_hi.\[0-7\|ALL\|BYTE\]** \| **alarm/current\_low.\[0-7\|ALL\|BYTE\]** \| **set\_alarm/current\_hi.\[0-7\|ALL\|BYTE\]** \| **set\_alarm/current\_low.\[0-7\|ALL\|BYTE\]** \| **counter/seconds** \| **memory** \| **pages/page.\[0-4\|ALL\]** ### Analog Voltage ( EDS0082 \[0-7\] EDS0085 \[0-3\] ) **7E.XXXXXXXXXXXX/EDS0082** \[/\[ **volts.\[0-7\|ALL\]** \| **max\_volts.\[0-7\|ALL\]** \| **min\_volts.\[0-7\|ALL\]** \| **threshold/volts\_hi.\[0-7\|ALL\]** \| **threshold/volts\_low.\[0-7\|ALL\]** \| **alarm/volts\_hi.\[0-7\|ALL\|BYTE\]** \| **alarm/volts\_low.\[0-7\|ALL\|BYTE\]** \| **set\_alarm/volts\_hi.\[0-7\|ALL\|BYTE\]** \| **set\_alarm/volts\_low.\[0-7\|ALL\|BYTE\]** \| **counter/seconds** \| **memory** \| **pages/page.\[0-4\|ALL\]** ### I/O ( EDS0090 ) **7E.XXXXXXXXXXXX/EDS009X** \[/\[ **input.\[0-7\|ALL\]** \| **counter/\[seconds \| pulses.\[0-7\|ALL\]\|reset.\[0-7\|ALL\|BYTE\]\]** \| **output/\[set.\[0-7\|ALL\|BYTE\]\|off.\[0-7\|ALL\|BYTE\]\|reset.\[0-7\|ALL\|BYTE\]\]** \| **latch/\[state.\[0-7\|ALL\|BYTE\]\|reset.\[0-7\|ALL\|BYTE\]\]** \| **alarm/\[hi.\[0-7\|ALL\]\|low.\[0-7\|ALL\]\|clear\]** \| **set\_alarm/\[hi.\[0-7\|ALL\]\|low.\[0-7\|ALL\]\]** ### LED ( all ) **7E.XXXXXXXXXXXX/EDS00XX/LED/\[state\|control\]** ### relay ( all ) **7E.XXXXXXXXXXXX/EDS00XX/relay/\[state\|control\]** ## FAMILY CODE - *7E* ## TEMPERATURE ### EDS006X/temperature *read-only, floating-point*\ Temperature for the EDS006X series of chips. In the -55C to 125C range, with 0.0636C precision. The temperature is read every second, continually. Data is presented in the specified temperature scale, Celsius by default. ### EDS007X/temperature *read-only, floating-point*\ Temperature for the EDS007X series of chips. Read using a wide-range precise RTD sensor. Typical range is -60C to 260C with 0.15C accuracy, although a range of -200C to 850C is possible. The temperature is read every second unless a longer *EDS007X/delay* is given. Data is presented in the specified temperature scale, Celsius by default. ### EDS007X/resistance *read-only, floating-point*\ Actual measured resistance (Ohms) of the RTD element. Useful if the RTD element doesn't conform to the typical European IEC 60751 standard. ## HUMIDITY ### EDS006X/humidity *read-only, floating-point*\ Relative humidity in the 0-100 range (percent). Read every 0.2 seconds. ### EDS006X/dew\_point *read-only, floating-point*\ Dew point computed from *EDS006X/temperature* and *EDS006X/humidity* computered every 0.2 seconds. Data is a calculated temperature and is reported in the specified temperature scale. Default Celsius. ### EDS006X/heat\_index *read-only, floating-point*\ Heat index computed from *EDS006X/temperature* and *EDS006X/humidity* computered every 0.2 seconds. Data is a calculated temperature and is reported in the specified temperature scale. Default Celsius. ### EDS006X/humidex *read-only, floating-point*\ Humidex (popular in Canada) computed from *EDS006X/temperature* and *EDS006X/humidity* computed every 0.2 seconds. Data is a percent and reported in the 0-100 range. ## LIGHT ### EDS006X/light *read-only, unsigned integer*\ Ambient light in Lux. Measured every 0.2 seconds. ## PRESSURE ### EDS006X/pressure *read-only, floating-point*\ Ambient pressure, measured every 0.2 seconds. Data in the selected pressure scale (default mBar). ### EDS006X/inHg *read-only, floating-point*\ Ambient pressure, measured every 0.2 seconds. Data in the inHg scale. ## VIBRATION ### EDS0070/vib\_level *read\_only, unsigned integer*\ Vibration registered by sensor (instantaneous value) in 0-1023 range. ### EDS0070/vib\_peak *read\_only, unsigned integer*\ Vibration registered by sensor (highest recent value -- slowly decays) in 0-1023 range. ### EDS0070/vib\_min *read\_only, unsigned integer*\ Vibration registered by sensor (lowest value) in 0-1023 range. ### EDS0070/vib\_max *read\_only, unsigned integer*\ Vibration registered by sensor (highest value) in 0-1023 range. ## CURRENT The **EDS0080** and **EDS0083** measure current in the 4-20mA range, with upper and threshold limits and the ability to set an alarm and independently trigger a relay if the value is out of range. ### EDS0080/current.\[0-7\|ALL\] EDS0083/current.\[0-3\|ALL\] *read-only, floating point*\ Current current level. (4-20mA) ### EDS0080/max\_current.\[0-7\|ALL\] EDS0080/max\_current.\[0-3\|ALL\] ### EDS0083/min\_current.\[0-7\|ALL\] EDS0083/min\_current.\[0-3\|ALL\] *read-only, floating point*\ Maximum and minimum current readings since last *alarm/clear* command. ## VOLTAGE The **EDS0082** and **EDS0085** measure voltage in the 0-10V range, with upper and threshold limits and the ability to set an alarm and independently trigger a relay if the value is out of range. ### EDS0082/volts.\[0-7\|ALL\] EDS0085/volts.\[0-3\|ALL\] *read-only, floating point*\ Current voltage level. (0-10V) ### EDS0082/max\_volts.\[0-7\|ALL\] EDS0085/max\_volts.\[0-3\|ALL\] ### EDS0082/min\_volts.\[0-7\|ALL\] EDS0085/min\_volts.\[0-3\|ALL\] *read-only, floating point*\ Maximum and minimum voltage readings since last *alarm/clear* command. ## THRESHOLD High and low range of acceptable sensor readings. Values outside this range will trigger an alarm if the corresponding *EDS00XX/set\_alarm flag is set.* ### EDS00XX/threshold/temp\_hi EDS00XX/threshold/temp\_low *read-write, floating-point*\ Threshold temperatures in the specified temperature scale. Default Celsius. ### EDS006X/threshold/humidity\_hi EDS006X/threshold/humidity\_low ### EDS006X/threshold/dew\_point\_hi EDS006X/threshold/dew\_point\_low ### EDS006X/threshold/heat\_index\_hi EDS006X/threshold/heat\_index\_low ### EDS006X/threshold/humidex\_hi tEDS006X/threshold/humidex\_low *read-write, floating-point*\ Threshold humidity values. *Dew point* and *Heat index* are in the specified temperature scale. Default Celsius. ### EDS006X/threshold/pressure\_hi EDS006X/threshold/pressure\_low ### EDS006X/threshold/inHg\_hi EDS006X/threshold/inHg\_low *read-write, floating-point*\ Threshold barometric pressure values. *Pressure* is the specified pressure scale. Default mBar. ### EDS006X/threshold/light\_hi EDS006X/threshold/light\_low *read-write, unsigned*\ Threshold light (lux) values. ### EDS0070/threshold/vib\_hi EDS0070/threshold/vib\_low *read-write, unsigned*\ Vibration sensor alarm limits in 0-1023 range. ### EDS007X/threshold/resistance\_hi EDS007X/threshold/resistance\_low *read-write, floating-point*\ Threshold RTD resistance values (Ohm). ### EDS0080/threshold/current\_hi.\[0-7\|ALL\] EDS0080/threshold/current\_low.\[0-7\|ALL\] ### EDS0082/threshold/volts\_hi.\[0-7\|ALL\] EDS0082/threshold/volts\_low.\[0-7\|ALL\] ### EDS0083/threshold/current\_hi.\[0-3\|ALL EDS0083/threshold/current\_low.\[0-3\|ALL\] ### EDS0085/threshold/volts\_hi.\[0-3\|ALL\] EDS0085/threshold/volts\_low.\[0-3\|ALL\|\] *read-write, floating-point*\ Voltage or current threshold limits ## SET ALARM Set conditional alarm to trigger if corresponding flag is set. Also must set high and low *threshold.* ### EDS00XX/set\_alarm/temp\_hi EDS00XX/set\_alarm/temp\_low ### EDS006X/set\_alarm/humidity\_hi EDS006X/set\_alarm/humidity\_low ### EDS006X/set\_alarm/dew\_point\_hi EDS006X/set\_alarm/dew\_point\_low ### EDS006X/set\_alarm/heat\_index\_hi EDS006X/set\_alarm/heat\_index\_low ### EDS006X/set\_alarm/humidex\_hi EDS006X/set\_alarm/humidex\_low ### EDS006X/set\_alarm/pressure\_hi EDS006X/set\_alarm/pressure\_low ### EDS006X/set\_alarm/inHg\_hi EDS006X/set\_alarm/inHg\_low ### EDS006X/set\_alarm/light\_hi EDS006X/set\_alarm/light\_low ### EDS0070/set\_alarm/vib\_hi EDS0070/set\_alarm/vib\_low ### EDS007X/set\_alarm/resistance\_hi EDS007X/set\_alarm/resistance\_low ### EDS0080/set\_alarm/current\_hi.\[0-7\|ALL\|BYTE\] ### EDS0080/set\_alarm/current\_low.\[0-7\|ALL\|BYTE\] ### EDS0082/set\_alarm/volts\_hi.\[0-7\|ALL\|BYTE\] ### EDS0082/set\_alarm/volts\_low.\[0-7\|ALL\|BYTE\] ### EDS0083/set\_alarm/current\_hi.\[0-3\|ALL\|BYTE\] ### EDS0083/set\_alarm/current\_low.\[0-3\|ALL\|BYTE\] ### EDS0085/set\_alarm/volts\_hi.\[0-3\|ALL\|BYTE\] ### EDS0085/set\_alarm/volts\_low.\[0-3\|ALL\|BYTE\] *read-write, yes-no*\ Flag to set corresponding out-of-range alarm. "1" turns on flag, and "0" turns off. ## ALARM Show or clear the out-of-range flags. When set, the device will respond to a conditional search. Clearing the flags is performed with the *EDS00XX/alarm/clear* command, not just having the measured value return to the center range. ### EDS00XX/alarm/clear *write-only, yes-no*\ Write "1" to clear **ALL** the alarm flags. ### EDS00XX/alarm/temp\_hi EDS00XX/alarm/temp\_low ### EDS006X/alarm/humidity\_hi EDS006X/alarm/humidity\_low ### EDS006X/alarm/dew\_point\_hi EDS006X/alarm/dew\_point\_low ### EDS006X/alarm/heat\_index\_hi EDS006X/alarm/heat\_index\_low ### EDS006X/alarm/humidex\_hi EDS006X/alarm/humidex\_low ### EDS006X/alarm/pressure\_hi EDS006X/alarm/pressure\_low ### EDS006X/alarm/inHg\_hi EDS006X/alarm/inHg\_low ### EDS006X/alarm/light\_hi EDS006X/alarm/light\_low ### EDS0070/alarm/vib\_hi EDS007X/alarm/vib\_low ### EDS007X/alarm/resistance\_hi EDS007X/alarm/resistance\_low ### EDS0080/alarm/current\_hi.\[0-7\|ALL\|BYTE\] ### EDS0080/alarm/current\_low.\[0-7\|ALL\|BYTE\] ### EDS0082/alarm/volts\_hi.\[0-7\|ALL\|BYTE\] ### EDS0082/alarm/volts\_low.\[0-7\|ALL\|BYTE\] ### EDS0083/alarm/current\_hi.\[0-3\|ALL\|BYTE\] ### EDS0083/alarm/current\_low.\[0-3\|ALL\|BYTE\] ### EDS0085/alarm/volts\_hi.\[0-3\|ALL\|BYTE\] ### EDS0085/alarm/volts\_low.\[0-3\|ALL\|BYTE\] ### EDS0090/alarm/hi\[0-7\|ALL\] EDS0090/alarm/low\[0-7\|ALL\] *read-only, yes-no*\ Show corresponding out-of-range alarm. "1" means in alarm state. Can only be turned off with *clear* ## RELAY Optionally found on the EDS006X and EDS007X. Can be controlled by software or the alarm condition. ### EDS00XX/relay/control *read-write, unsigned*\ Set the relay control scheme: - 0 alarm control with hysteresis - 1 alarm control but need *EDS00XX/alarm/clear* to unset - 2 Control with *EDS00XX/relay/state* - 3 Always off ### EDS00XX/relay/state *read-write, yes-no*\ Turn the relay on or off if the *EDS00XX/relay/control is set to 2* ## LED light Found on the EDS006X and EDS007X. Can be controlled by software or the alarm condition. ### EDS00XX/LED/control *read-write, unsigned*\ Set the LED control scheme: - 0 alarm control with hysteresis - 1 alarm control but need *EDS00XX/alarm/clear* to unset - 2 Control with *EDS00XX/LED/state* - 3 Always off ### EDS00XX/LED/state *read-write, yes-no*\ Turn the LED on or off if the *EDS00XX/LED/control is set to 2* ## COUNTER ### EDS00XX/counter/seconds *read-only, unsigned integer*\ Approximate seconds since power up. ### EDS0090/counter/pulses.0-7 \| ALL *read-only, unsigned integer*\ Pulses on each channel since power up or reset. Channel should be set to input ( *EDS0090/output/set.x* =0 ) ### EDS0090/counter/reset.0-7 \| ALL \| BYTE *read-write, yes-no*\ Clear the pulse count on the corresponding channel. ### EDS007X/counter/samples *read-only, unsigned integer*\ Approximate samples since power up. ## MEMORY ### memory *read-write, binary*\ 96 bytes of memory. Not all is writable. Access to *EDS00XX* functions is better accomplished through the data fields, which expose all the chip features. ### pages/page.0 ... pages/page.2 pages/page.ALL *read-write, binary*\ Memory is split into 3 pages of 32 bytes each. Only page 2 is writable. *ALL* is an aggregate of the pages. Each page is accessed sequentially. ### EDS008X/memory *read-write, binary*\ 160 bytes of memory. Not all is writable. Access to *EDS008X* functions is better accomplished through the data fields, which expose all the chip features. The *EDS008X* has more memory than the other chips, so a separate entry in the sudbirectory makes it available. ### EDS008X/pages/page.0-4 EDS008X/pages/page.ALL *read-write, binary*\ Memory is split into 5 pages of 32 bytes each. Only page 5 is writable. The *EDS008X* has more memory than the other chips, so a separate entry in the sudbirectory makes the extra pages available. *ALL* is an aggregate of the pages. Each page is accessed sequentially. ## SUB-TYPE ### tag *read-only, ascii*\ Text description of the device. Up to 30 characters. ### device\_type *read-only, ascii*\ Device name. E.g: "EDS0071" ### device\_id *read-only, unsigned*\ Number corresponding to the hexadecimal type. E.g:\ EDS0071 -\> 0x0071 -\> 113 in decimal ## STANDARD PROPERTIES ### address ### r\_address *read-only, ascii*\ The entire 64-bit unique ID. Given as upper case hexadecimal digits (0-9A-F).\ *address* starts with the *family* code\ *r address* is the *address* in reverse order, which is often used in other applications and labeling. ### crc8 *read-only, ascii*\ The 8-bit error correction portion. Uses cyclic redundancy check. Computed from the preceding 56 bits of the unique ID number. Given as upper case hexadecimal digits (0-9A-F). ### family *read-only, ascii*\ The 8-bit family code. Unique to each *type* of device. Given as upper case hexadecimal digits (0-9A-F). ### id ### r\_id *read-only, ascii*\ The 48-bit middle portion of the unique ID number. Does not include the family code or CRC. Given as upper case hexadecimal digits (0-9A-F).\ *r id* is the *id* in reverse order, which is often used in other applications and labeling. ### locator ### r\_locator *read-only, ascii*\ Uses an extension of the 1-wire design from iButtonLink company that associated 1-wire physical connections with a unique 1-wire code. If the connection is behind a **Link Locator** the *locator will show a unique 8-byte number (16 character hexadecimal) starting with family code FE.*\ If no **Link Locator** is between the device and the master, the *locator* field will be all FF.\ *r locator* is the *locator* in reverse order. ### present (DEPRECATED) *read-only, yes-no*\ Is the device currently *present* on the 1-wire bus? ### type *read-only, ascii*\ Part name assigned by Dallas Semi. E.g. *DS2401* Alternative packaging (iButton vs chip) will not be distiguished. ## ALARMS None. ## DESCRIPTION ### 1-Wire *1-wire* is a wiring protocol and series of devices designed and manufactured by Dallas Semiconductor, Inc. The bus is a low-power low-speed low-connector scheme where the data line can also provide power. Each device is uniquely and unalterably numbered during manufacture. There are a wide variety of devices, including memory, sensors (humidity, temperature, voltage, contact, current), switches, timers and data loggers. More complex devices (like thermocouple sensors) can be built with these basic devices. There are also 1-wire devices that have encryption included. The 1-wire scheme uses a single *bus master* and multiple *slaves* on the same wire. The bus master initiates all communication. The slaves can be individually discovered and addressed using their unique ID. Bus masters come in a variety of configurations including serial, parallel, i2c, network or USB adapters. ### OWFS design *OWFS* is a suite of programs that designed to make the 1-wire bus and its devices easily accessible. The underlying principle is to create a virtual filesystem, with the unique ID being the directory, and the individual properties of the device are represented as simple files that can be read and written. Details of the individual slave or master design are hidden behind a consistent interface. The goal is to provide an easy set of tools for a software designer to create monitoring or control applications. There are some performance enhancements in the implementation, including data caching, parallel access to bus masters, and aggregation of device communication. Still the fundamental goal has been ease of use, flexibility and correctness rather than speed. ### EDS00XX Overview The EDS00XX sensors are a family of devices from *Embedded Data Systems.* Although provisional support for several types is included, only early *EDS0071* has been tested with *OWFS.* The sensors all share the same *7E* family code. They have the same first memory page layout with a text *tag* property that describes them, and a *sub-type* field giving the particular sensor. The data properties shown in a directory listing will be specific to the sensor *sub-type.* ### EDS0071 The **EDS0071 (3)** is a micro-processor based 1-wire slave made by EDS (Embedded Data Systams). Is uses a high accuracy and extended range RTD sensor to accurately measure temperatures. ### Memory The *EDS00XX* sensors are read and controlled by accessing parts of their on-chip memory. Although the raw memory contents are exposed in the *memory* and *pages* fields, all the available functionality is best accessed by the other fields. In fact, directly changing memory will confuse *OWFS.* ### Relay and LED All the *EDS00XX* sensors have an LED and optional relay. Both can be controlled either directly, or when the sensors reaches an alarm state. ## ADDRESSING All 1-wire devices are factory assigned a unique 64-bit address. This address is of the form: - **Family Code** 8 bits - **Address** 48 bits - **CRC** 8 bits - Addressing under OWFS is in hexadecimal, of form: - **01.123456789ABC** where **01** is an example 8-bit family code, and **12345678ABC** is an example 48 bit address. The dot is optional, and the CRC code can included. If included, it must be correct. ## DATASHEET - **EDS0064 EDS0065 EDS0066 EDS0067 EDS0068** https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B\_K3iXLLAI7vN2E4NGUwMGItMzc5MS00NDNmLTljZGYtN2NmM2Q3YWE5NmVh&hl=en - **EDS0070** http://www.embeddeddatasystems.com/assets/images/supportFiles/manuals/EN-UserMan%20%20OW-Vibration%20V01.pdf - **EDS0071 EDS0072** https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B\_K3iXLLAI7vMjVhNWQzYzItZTRhMi00NGY2LWI4NTQtYjZlYTgzYzY0NmNm&hl=en - **EDS0080 EDS0083** https://eds.zendesk.com/attachments/token/ulnpj6mvpp6yzwo/?name=EN-USERMAN+OW-IO-AIX-420+v1p0.pdf - **EDS0082 EDS0085** https://eds.zendesk.com/attachments/token/vyai6ylpw6edala/?name=EN-USERMAN+OW-IO-AIX-10V+v1p0.pdf - **EDS0090** 8 Discrete I/O ## SEE ALSO ### Programs **owfs (1) owhttpd (1) owftpd (1) owserver (1)** **owdir (1) owread (1) owwrite (1) owpresent (1)** **owtap (1)** ### Configuration and testing **owfs (5) owtap (1) owmon (1)** ### Language bindings **owtcl (3) owperl (3) owcapi (3)** ### Clocks **DS1427 (3) DS1904 (3) DS1994 (3) DS2404 (3) DS2404S (3) DS2415 (3) DS2417 (3)** ### ID **DS2401 (3) DS2411 (3) DS1990A (3)** ### Memory **DS1982 (3) DS1985 (3) DS1986 (3) DS1991 (3) DS1992 (3) DS1993 (3) DS1995 (3) DS1996 (3) DS2430A (3) DS2431 (3) DS2433 (3) DS2502 (3) DS2506 (3) DS28E04 (3) DS28EC20 (3)** ### Switches **DS2405 (3) DS2406 (3) DS2408 (3) DS2409 (3) DS2413 (3) DS28EA00 (3) InfernoEmbedded (3)** ### Temperature **DS1822 (3) DS1825 (3) DS1820 (3) DS18B20 (3) DS18S20 (3) DS1920 (3) DS1921 (3) DS1821 (3) DS28EA00 (3) DS28E04 (3) EDS0064 (3) EDS0065 (3) EDS0066 (3) EDS0067 (3) EDS0068 (3) EDS0071 (3) EDS0072 (3) MAX31826 (3)** ### Humidity **DS1922 (3) DS2438 (3) EDS0065 (3) EDS0068 (3)** ### Voltage **DS2450 (3)** ### Resistance **DS2890 (3)** ### Multifunction (current, voltage, temperature) **DS2436 (3) DS2437 (3) DS2438 (3) DS2751 (3) DS2755 (3) DS2756 (3) DS2760 (3) DS2770 (3) DS2780 (3) DS2781 (3) DS2788 (3) DS2784 (3)** ### Counter **DS2423 (3)** ### LCD Screen **LCD (3) DS2408 (3)** ### Crypto **DS1977 (3)** ### Pressure **DS2406 (3) TAI8570 (3) EDS0066 (3) EDS0068 (3)** ### Moisture **EEEF (3) DS2438 (3)** ## AVAILABILITY http://www.owfs.org ## AUTHOR Paul Alfille (paul.alfille@gmail.com)