---
name: "Config::Model::models::LCDd::NoritakeVFD"
section: "3pm"
platform: "linux"
package: "libconfig-model-lcdproc-perl"
version: "2.055-2"
release: "Debian 13 (Trixie)"
platforms: ["linux"]
url: "https://new.carta.tech/Config::Model::models::LCDd::NoritakeVFD"
---

# Config::Model::models::LCDd::NoritakeVFD(3pm)

Configuration class LCDd::NoritakeVFD

## NAME

Config::Model::models::LCDd::NoritakeVFD - Configuration class LCDd::NoritakeVFD

## DESCRIPTION

Configuration classes used by Config::Model

generated from LCDd.conf

## Elements

### Brightness

Set the initial brightness  *Optional. Type integer.*

- upstream\_default value :

  1000

### Device

device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1.  *Optional. Type uniline.*

- upstream\_default value :

  /dev/lcd

### OffBrightness

Set the initial off-brightness  This value is used when the display is normally switched off in case LCDd is inactive.  *Optional. Type integer.*

- upstream\_default value :

  0

### Parity

Set serial data parity  Meaning: 0(=none), 1(=odd), 2(=even)  *Optional. Type integer.*

- upstream\_default value :

  0

### Reboot

re-initialize the VFD  *Optional. Type boolean.*

- upstream\_default value :

  no

### Size

Specifies the size of the LCD.  *Optional. Type uniline.*

- default value :

  20x4

### Speed

set the serial port speed  *Optional. Type uniline.*

- upstream\_default value :

  9600,legal:1200,2400,9600,19200,115200

## SEE ALSO

- •

  cme