NAME
Config::Model::models::LCDd::MtxOrb - Configuration class LCDd::MtxOrb
DESCRIPTION
Configuration classes used by Config::Model
generated from LCDd.conf
Elements
Brightness
Set the initial brightness Optional. Type integer.
- upstream_default value :
-
1000
Contrast
Set the initial contrast NOTE: The driver will ignore this if the display
is a vfd or vkd as they don't have this feature. Optional. Type uniline.
- upstream_default value :
-
480
Device
Select the output device to use Optional. Type uniline.
- upstream_default value :
-
/dev/lcd
KeyMap_A
The following table translates from MtxOrb key letters to logical key names. By default no keys are mapped, meaning the keypad is not used at all. Optional. Type uniline.
- upstream_default value :
-
Left
KeyMap_B
Optional. Type uniline.
- upstream_default value :
-
Right
KeyMap_C
Optional. Type uniline.
- upstream_default value :
-
Up
KeyMap_D
Optional. Type uniline.
- upstream_default value :
-
Down
KeyMap_E
Optional. Type uniline.
- upstream_default value :
-
Enter
KeyMap_F
Optional. Type uniline.
- upstream_default value :
-
Escape
OffBrightness
Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type integer.
- upstream_default value :
-
0
Size
Set the display size Optional. Type uniline.
- upstream_default value :
-
20x4
Speed
Set the communication speed Optional. Type enum. choice: '1200', '2400', '9600', '19200'.
- upstream_default value :
-
19200
Type
Set the display type Optional. Type enum. choice: 'lcd', 'lkd', 'vfd', 'vkd'.
- upstream_default value :
-
lcd
hasAdjustableBacklight
Some old displays do not have an adjustable backlight but only can switch the backlight on/off. If you experience randomly appearing block characters, try setting this to false. Optional. Type boolean.
- upstream_default value :
-
yes
keypad_test_mode
See the [menu] section for an explanation of the key mappings You can find out which key of your display sends which character by setting keypad_test_mode to yes and running LCDd. LCDd will output all characters it receives. Afterwards you can modify the settings above and set keypad_set_mode to no again. Optional. Type uniline.
- default value :
-
no
SEE ALSO
- •
-
cme