---
name: "Config::Model::models::LCDd::CFontzPacket"
section: "3pm"
platform: "linux"
package: "libconfig-model-lcdproc-perl"
version: "2.055-2"
release: "Debian 13 (Trixie)"
platforms: ["linux"]
url: "https://new.carta.tech/Config::Model::models::LCDd::CFontzPacket"
---

# Config::Model::models::LCDd::CFontzPacket(3pm)

Configuration class LCDd::CFontzPacket

## NAME

Config::Model::models::LCDd::CFontzPacket - Configuration class LCDd::CFontzPacket

## DESCRIPTION

Configuration classes used by Config::Model

generated from LCDd.conf

## Elements

### Brightness

Set the initial brightness  *Optional. Type integer.*

- upstream\_default value :

  1000

### Contrast

Set the initial contrast  *Optional. Type integer.*

- upstream\_default value :

  560

### Device

Select the output device to use  *Optional. Type uniline.*

- upstream\_default value :

  /dev/lcd

### Model

Select the LCD model  *Optional. Type enum. choice: '533', '631', '633', '635'.*

- upstream\_default value :

  633

### OffBrightness

Set the initial off-brightness  This value is used when the display is normally switched off in case LCDd is inactive.  *Optional. Type integer.*

- upstream\_default value :

  0

### OldFirmware

Very old 633 firmware versions do not support partial screen updates using 'Send Data to LCD' command (31). For those devices it may be necessary to enable this flag.  *Optional. Type boolean.*

- upstream\_default value :

  no

### Reboot

Reinitialize the LCD's BIOS on driver start.  *Optional. Type boolean.*

- upstream\_default value :

  no

### Size

Override the LCD size known for the selected model. Usually setting this value should not be necessary.  *Optional. Type uniline.*

- upstream\_default value :

  20x4

### Speed

Override the default communication speed known for the selected model. Default value depends on model  *Optional. Type enum. choice: '19200', '115200'.*

### USB

Enable the USB flag if the device is connected to an USB port. For serial ports leave it disabled.  *Optional. Type boolean.*

- upstream\_default value :

  no

## SEE ALSO

- •

  cme