--- name: "App::Yath::Command::kill" section: "3pm" platform: "linux" package: "libtest2-harness-perl" version: "1.000158-1" release: "Debian 13 (Trixie)" platforms: ["linux"] url: "https://new.carta.tech/App::Yath::Command::kill" --- # App::Yath::Command::kill(3pm) Kill the runner and any running or pending tests ## NAME App::Yath::Command::kill - Kill the runner and any running or pending tests ## DESCRIPTION This command will kill the active yath runner and any running or pending tests. ## USAGE ``` $ yath [YATH OPTIONS] kill [COMMAND OPTIONS] ``` ### YATH OPTIONS *Developer* - \--dev-lib - \--dev-lib=lib - \-D - \-D=lib - \-Dlib - \--no-dev-lib Add paths to `@INC` before loading ANYTHING. This is what you use if you are developing yath or yath plugins to make sure the yath script finds the local code instead of the installed versions of the same code. You can provide an argument (-Dfoo) to provide a custom path, or you can just use -D without and arg to add lib, blib/lib and blib/arch. Can be specified multiple times *Environment* - \--persist-dir ARG - \--persist-dir=ARG - \--no-persist-dir Where to find persistence files. - \--persist-file ARG - \--persist-file=ARG - \--pfile ARG - \--pfile=ARG - \--no-persist-file Where to find the persistence file. The default is /{system-tempdir}/project-yath-persist.json. If no project is specified then it will fall back to the current directory. If the current directory is not writable it will default to /tmp/yath-persist.json which limits you to one persistent runner on your system. - \--project ARG - \--project=ARG - \--project-name ARG - \--project-name=ARG - \--no-project This lets you provide a label for your current project/codebase. This is best used in a .yath.rc file. This is necessary for a persistent runner. *Finder Options* - \--finder MyFinder - \--finder +Test2::Harness::Finder::MyFinder - \--no-finder Specify what Finder subclass to use when searching for files/processing the file list. Use the "+" prefix to specify a fully qualified namespace, otherwise Test2::Harness::Finder::XXX namespace is assumed. *Help and Debugging* - \--show-opts - \--no-show-opts Exit after showing what yath thinks your options mean - \--version - \-V - \--no-version Exit after showing a helpful usage message *Plugins* - \--no-scan-plugins - \--no-no-scan-plugins Normally yath scans for and loads all App::Yath::Plugin::\* modules in order to bring in command-line options they may provide. This flag will disable that. This is useful if you have a naughty plugin that is loading other modules when it should not. - \--plugins PLUGIN - \--plugins +App::Yath::Plugin::PLUGIN - \--plugins PLUGIN=arg1,arg2,... - \--plugin PLUGIN - \--plugin +App::Yath::Plugin::PLUGIN - \--plugin PLUGIN=arg1,arg2,... - \-pPLUGIN - \--no-plugins Load a yath plugin. Can be specified multiple times ### COMMAND OPTIONS *Cover Options* - \--cover-aggregator ByTest - \--cover-aggregator ByRun - \--cover-aggregator +Custom::Aggregator - \--cover-agg ByTest - \--cover-agg ByRun - \--cover-agg +Custom::Aggregator - \--no-cover-aggregator Choose a custom aggregator subclass - \--cover-class ARG - \--cover-class=ARG - \--no-cover-class Choose a Test2::Plugin::Cover subclass - \--cover-dirs ARG - \--cover-dirs=ARG - \--cover-dir ARG - \--cover-dir=ARG - \--no-cover-dirs NO DESCRIPTION - FIX ME Can be specified multiple times - \--cover-exclude-private - \--no-cover-exclude-private - \--cover-files - \--no-cover-files Use Test2::Plugin::Cover to collect coverage data for what files are touched by what tests. Unlike Devel::Cover this has very little performance impact (About 4% difference) - \--cover-from path/to/log.jsonl - \--cover-from http://example.com/coverage - \--cover-from path/to/coverage.jsonl - \--no-cover-from This can be a test log, a coverage dump (old style json or new jsonl format), or a url to any of the previous. Tests will not be run if the file/url is invalid. - \--cover-from-type json - \--cover-from-type jsonl - \--cover-from-type log - \--no-cover-from-type File type for coverage source. Usually it can be detected, but when it cannot be you should specify. "json" is old style single-blob coverage data, "jsonl" is the new by-test style, "log" is a logfile from a previous run. - \--cover-manager My::Coverage::Manager - \--no-cover-manager Coverage 'from' manager to use when coverage data does not provide one - \--cover-maybe-from path/to/log.jsonl - \--cover-maybe-from http://example.com/coverage - \--cover-maybe-from path/to/coverage.jsonl - \--no-cover-maybe-from This can be a test log, a coverage dump (old style json or new jsonl format), or a url to any of the previous. Tests will coninue if even if the coverage file/url is invalid. - \--cover-maybe-from-type json - \--cover-maybe-from-type jsonl - \--cover-maybe-from-type log - \--no-cover-maybe-from-type Same as "from\_type" but for "maybe\_from". Defaults to "from\_type" if that is specified, otherwise auto-detect - \--cover-metrics - \--no-cover-metrics - \--cover-types ARG - \--cover-types=ARG - \--cover-type ARG - \--cover-type=ARG - \--no-cover-types NO DESCRIPTION - FIX ME Can be specified multiple times - \--cover-write - \--cover-write=coverage.jsonl - \--cover-write=coverage.json - \--no-cover-write Create a json or jsonl file of all coverage data seen during the run (This implies --cover-files). *Display Options* - \--color - \--no-color Turn color on, default is true if STDOUT is a TTY. - \--hide-runner-output - \--no-hide-runner-output Hide output from the runner, showing only test output. (See Also truncate\_runner\_output) - \--no-wrap - \--no-no-wrap Do not do fancy text-wrapping, let the terminal handle it - \--progress - \--no-progress Toggle progress indicators. On by default if STDOUT is a TTY. You can use --no-progress to disable the 'events seen' counter and buffered event pre-display - \--quiet - \-q - \--no-quiet Be very quiet. Can be specified multiple times - \--renderers +My::Renderer - \--renderers Renderer=arg1,arg2,... - \--renderer +My::Renderer - \--renderer Renderer=arg1,arg2,... - \--no-renderers Specify renderers, (Default: "Formatter=Test2"). Use "+" to give a fully qualified module name. Without "+" "Test2::Harness::Renderer::" will be prepended to your argument. Can be specified multiple times. If the same key is listed multiple times the value lists will be appended together. - \--show-times - \-T - \--no-show-times Show the timing data for each job - \--term-width 80 - \--term-width 200 - \--term-size 80 - \--term-size 200 - \--no-term-width Alternative to setting `$TABLE_TERM_SIZE`. Setting this will override the terminal width detection to the number of characters specified. - \--truncate-runner-output - \--no-truncate-runner-output Only show runner output that was generated after the current command. This is only useful with a persistent runner. - \--verbose - \-v - \--no-verbose Be more verbose Can be specified multiple times *Finder Options* - \--changed path/to/file - \--no-changed Specify one or more files as having been changed. Can be specified multiple times - \--changed-only - \--no-changed-only Only search for tests for changed files (Requires a coverage data source, also requires a list of changes either from the --changed option, or a plugin that implements **changed\_files()** or **changed\_diff()**) - \--changes-diff path/to/diff.diff - \--no-changes-diff Path to a diff file that should be used to find changed files for use with --changed-only. This must be in the same format as \`git diff -W --minimal -U1000000\` - \--changes-exclude-file path/to/file - \--no-changes-exclude-file Specify one or more files to ignore when looking at changes Can be specified multiple times - \--changes-exclude-loads - \--no-changes-exclude-loads Exclude coverage tests which only load changed files, but never call code from them. (default: off) - \--changes-exclude-nonsub - \--no-changes-exclude-nonsub Exclude changes outside of subroutines (perl files only) (default: off) - \--changes-exclude-opens - \--no-changes-exclude-opens Exclude coverage tests which only **open()** changed files, but never call code from them. (default: off) - \--changes-exclude-pattern '(apple\|pear\|orange)' - \--no-changes-exclude-pattern Ignore files matching this pattern when looking for changes. Your pattern will be inserted unmodified into a \`$file =~ m/$pattern/\` check. Can be specified multiple times - \--changes-filter-file path/to/file - \--no-changes-filter-file Specify one or more files to check for changes. Changes to other files will be ignored Can be specified multiple times - \--changes-filter-pattern '(apple\|pear\|orange)' - \--no-changes-filter-pattern Specify a pattern for change checking. When only running tests for changed files this will limit which files are checked for changes. Only files that match this pattern will be checked. Your pattern will be inserted unmodified into a \`$file =~ m/$pattern/\` check. Can be specified multiple times - \--changes-include-whitespace - \--no-changes-include-whitespace Include changed lines that are whitespace only (default: off) - \--changes-plugin Git - \--changes-plugin +App::Yath::Plugin::Git - \--no-changes-plugin What plugin should be used to detect changed files. - \--default-at-search ARG - \--default-at-search=ARG - \--no-default-at-search Specify the default file/dir search when 'AUTHOR\_TESTING' is set. Defaults to './xt'. The default AT search is only used if no files were specified at the command line Can be specified multiple times - \--default-search ARG - \--default-search=ARG - \--no-default-search Specify the default file/dir search. defaults to './t', './t2', and 'test.pl'. The default search is only used if no files were specified at the command line Can be specified multiple times - \--durations file.json - \--durations http://example.com/durations.json - \--no-durations Point at a json file or url which has a hash of relative test filenames as keys, and 'SHORT', 'MEDIUM', or 'LONG' as values. This will override durations listed in the file headers. An exception will be thrown if the durations file or url does not work. - \--durations-threshold ARG - \--durations-threshold=ARG - \--Dt ARG - \--Dt=ARG - \--no-durations-threshold Only fetch duration data if running at least this number of tests. Default (-j value + 1) - \--exclude-file t/nope.t - \--no-exclude-file Exclude a file from testing Can be specified multiple times - \--exclude-list file.txt - \--exclude-list http://example.com/exclusions.txt - \--no-exclude-list Point at a file or url which has a new line separated list of test file names to exclude from testing. Starting a line with a '#' will comment it out (for compatibility with Test2::Aggregate list files). Can be specified multiple times - \--exclude-pattern t/nope.t - \--no-exclude-pattern Exclude a pattern from testing, matched using m/$PATTERN/ Can be specified multiple times - \--extension ARG - \--extension=ARG - \--ext ARG - \--ext=ARG - \--no-extension Specify valid test filename extensions, default: t and t2 Can be specified multiple times - \--maybe-durations file.json - \--maybe-durations http://example.com/durations.json - \--no-maybe-durations Point at a json file or url which has a hash of relative test filenames as keys, and 'SHORT', 'MEDIUM', or 'LONG' as values. This will override durations listed in the file headers. An exception will be thrown if the durations file or url does not work. - \--no-long - \--no-no-long Do not run tests that have their duration flag set to 'LONG' - \--only-long - \--no-only-long Only run tests that have their duration flag set to 'LONG' - \--rerun - \--rerun=path/to/log.jsonl - \--rerun=plugin\_specific\_string - \--no-rerun Re-Run tests from a previous run from a log file (or last log file). Plugins can intercept this, such as YathUIDB which will grab a run UUID and derive tests to re-run from that. - \--rerun-all - \--rerun-all=path/to/log.jsonl - \--rerun-all=plugin\_specific\_string - \--no-rerun-all Re-Run all tests from a previous run from a log file (or last log file). Plugins can intercept this, such as YathUIDB which will grab a run UUID and derive tests to re-run from that. - \--rerun-failed - \--rerun-failed=path/to/log.jsonl - \--rerun-failed=plugin\_specific\_string - \--no-rerun-failed Re-Run failed tests from a previous run from a log file (or last log file). Plugins can intercept this, such as YathUIDB which will grab a run UUID and derive tests to re-run from that. - \--rerun-missed - \--rerun-missed=path/to/log.jsonl - \--rerun-missed=plugin\_specific\_string - \--no-rerun-missed Run missed tests from a previously aborted/stopped run from a log file (or last log file). Plugins can intercept this, such as YathUIDB which will grab a run UUID and derive tests to re-run from that. - \--rerun-modes failed,missed,... - \--rerun-modes all - \--rerun-modes failed - \--rerun-modes missed - \--rerun-modes passed - \--rerun-modes retried - \--rerun-mode failed,missed,... - \--rerun-mode all - \--rerun-mode failed - \--rerun-mode missed - \--rerun-mode passed - \--rerun-mode retried - \--no-rerun-modes Pick which test categories to run Can be specified multiple times - \--rerun-passed - \--rerun-passed=path/to/log.jsonl - \--rerun-passed=plugin\_specific\_string - \--no-rerun-passed Re-Run passed tests from a previous run from a log file (or last log file). Plugins can intercept this, such as YathUIDB which will grab a run UUID and derive tests to re-run from that. - \--rerun-plugin Foo - \--rerun-plugin +App::Yath::Plugin::Foo - \--no-rerun-plugin What plugin(s) should be used for rerun (will fallback to other plugins if the listed ones decline the value, this is just used ot set an order of priority) Can be specified multiple times - \--rerun-retried - \--rerun-retried=path/to/log.jsonl - \--rerun-retried=plugin\_specific\_string - \--no-rerun-retried Re-Run retried tests from a previous run from a log file (or last log file). Plugins can intercept this, such as YathUIDB which will grab a run UUID and derive tests to re-run from that. - \--search ARG - \--search=ARG - \--no-search List of tests and test directories to use instead of the default search paths. Typically these can simply be listed as command line arguments without the --search prefix. Can be specified multiple times - \--show-changed-files - \--no-show-changed-files Print a list of changed files if any are found *Formatter Options* - \--formatter ARG - \--formatter=ARG - \--no-formatter NO DESCRIPTION - FIX ME - \--qvf - \--no-qvf \[Q\]uiet, but \[V\]erbose on \[F\]ailure. Hide all output from tests when they pass, except to say they passed. If a test fails then ALL output from the test is verbosely output. - \--show-job-end - \--no-show-job-end Show output when a job ends. (Default: on) - \--show-job-info - \--no-show-job-info Show the job configuration when a job starts. (Default: off, unless -vv) - \--show-job-launch - \--no-show-job-launch Show output for the start of a job. (Default: off unless -v) - \--show-run-info - \--no-show-run-info Show the run configuration when a run starts. (Default: off, unless -vv) *Git Options* - \--git-change-base master - \--git-change-base HEAD^ - \--git-change-base df22abe4 - \--no-git-change-base Find files changed by all commits in the current branch from most recent stopping when a commit is found that is also present in the history of the branch/commit specified as the change base. *Help and Debugging* - \--dummy - \-d - \--no-dummy Dummy run, do not actually execute anything Can also be set with the following environment variables: `"T2_HARNESS_DUMMY"` - \--help - \-h - \--no-help exit after showing help information - \--interactive - \-i - \--no-interactive Use interactive mode, 1 test at a time, stdin forwarded to it - \--keep-dirs - \--keep\_dir - \-k - \--no-keep-dirs Do not delete directories when done. This is useful if you want to inspect the directories used for various commands. - \--procname-prefix ARG - \--procname-prefix=ARG - \--no-procname-prefix Add a prefix to all proc names (as seen by ps). - \--summary - \--summary=/path/to/summary.json - \--no-summary Write out a summary json file, if no path is provided 'summary.json' will be used. The .json extension is added automatically if omitted. *Logging Options* - \--bzip2 - \--bz2 - \--bzip2\_log - \-B - \--no-bzip2 Use bzip2 compression when writing the log. This option implies -L. The .bz2 prefix is added to log file name for you - \--gzip - \--gz - \--gzip\_log - \-G - \--no-gzip Use gzip compression when writing the log. This option implies -L. The .gz prefix is added to log file name for you - \--log - \-L - \--no-log Turn on logging - \--log-dir ARG - \--log-dir=ARG - \--no-log-dir Specify a log directory. Will fall back to the system temp dir. - \--log-file ARG - \--log-file=ARG - \-F ARG - \-F=ARG - \--no-log-file Specify the name of the log file. This option implies -L. - \--log-file-format ARG - \--log-file-format=ARG - \--lff ARG - \--lff=ARG - \--no-log-file-format Specify the format for automatically-generated log files. Overridden by --log-file, if given. This option implies -L (Default: \\$YATH\_LOG\_FILE\_FORMAT, if that is set, or else "%!P%Y-%m-%d~%H:%M:%S~%!U~%!p.jsonl"). This is a string in which percent-escape sequences will be replaced as per POSIX::strftime. The following special escape sequences are also replaced: (%!P : Project name followed by a ~, if a project is defined, otherwise empty string) (%!U : the unique test run ID) (%!p : the process ID) (%!S : the number of seconds since local midnight UTC) Can also be set with the following environment variables: `"YATH_LOG_FILE_FORMAT"`, `"TEST2_HARNESS_LOG_FORMAT"` *Notification Options* - \--notify-email foo@example.com - \--no-notify-email Email the test results to the specified email address(es) Can be specified multiple times - \--notify-email-fail foo@example.com - \--no-notify-email-fail Email failing results to the specified email address(es) Can be specified multiple times - \--notify-email-from foo@example.com - \--no-notify-email-from If any email is sent, this is who it will be from - \--notify-email-owner - \--no-notify-email-owner Email the owner of broken tests files upon failure. Add \`# HARNESS-META-OWNER foo@example.com\` to the top of a test file to give it an owner - \--notify-no-batch-email - \--no-notify-no-batch-email Usually owner failures are sent as a single batch at the end of testing. Toggle this to send failures as they happen. - \--notify-no-batch-slack - \--no-notify-no-batch-slack Usually owner failures are sent as a single batch at the end of testing. Toggle this to send failures as they happen. - \--notify-slack '#foo' - \--notify-slack '@bar' - \--no-notify-slack Send results to a slack channel and/or user Can be specified multiple times - \--notify-slack-fail '#foo' - \--notify-slack-fail '@bar' - \--no-notify-slack-fail Send failing results to a slack channel and/or user Can be specified multiple times - \--notify-slack-owner - \--no-notify-slack-owner Send slack notifications to the slack channels/users listed in test meta-data when tests fail. - \--notify-slack-url https://hooks.slack.com/... - \--no-notify-slack-url Specify an API endpoint for slack webhook integrations - \--notify-text ARG - \--notify-text=ARG - \--message ARG - \--message=ARG - \--msg ARG - \--msg=ARG - \--no-notify-text Add a custom text snippet to email/slack notifications - \--notify-text-module ARG - \--notify-text-module=ARG - \--message\_module ARG - \--message\_module=ARG - \--no-notify-text-module Use the specified module to generate messages for emails and/or slack. *Run Options* - \--author-testing - \-A - \--no-author-testing This will set the AUTHOR\_TESTING environment to true - \--dbi-profiling - \--no-dbi-profiling Use Test2::Plugin::DBIProfile to collect database profiling data - \--env-var VAR=VAL - \-EVAR=VAL - \-E VAR=VAL - \--no-env-var Set environment variables to set when each test is run. Can be specified multiple times - \--event-uuids - \--uuids - \--no-event-uuids Use Test2::Plugin::UUID inside tests (default: on) - \--fields name:details - \--fields JSON\_STRING - \-f name:details - \-f JSON\_STRING - \--no-fields Add custom data to the harness run Can be specified multiple times - \--input ARG - \--input=ARG - \--no-input Input string to be used as standard input for ALL tests. See also: --input-file - \--input-file ARG - \--input-file=ARG - \--no-input-file Use the specified file as standard input to ALL tests - \--io-events - \--no-io-events Use Test2::Plugin::IOEvents inside tests to turn all prints into test2 events (default: off) - \--link 'https://travis.work/builds/42' - \--link 'https://jenkins.work/job/42' - \--link 'https://buildbot.work/builders/foo/builds/42' - \--no-link Provide one or more links people can follow to see more about this run. Can be specified multiple times - \--load ARG - \--load=ARG - \--load-module ARG - \--load-module=ARG - \-m ARG - \-m=ARG - \--no-load Load a module in each test (after fork). The "import" method is not called. Can be specified multiple times - \--load-import Module - \--load-import Module=import\_arg1,arg2,... - \--loadim Module - \--loadim Module=import\_arg1,arg2,... - \-M Module - \-M Module=import\_arg1,arg2,... - \--no-load-import Load a module in each test (after fork). Import is called. Can be specified multiple times. If the same key is listed multiple times the value lists will be appended together. - \--mem-usage - \--no-mem-usage Use Test2::Plugin::MemUsage inside tests (default: on) - \--retry ARG - \--retry=ARG - \-r ARG - \-r=ARG - \--no-retry Run any jobs that failed a second time. NOTE: --retry=1 means failing tests will be attempted twice! - \--retry-isolated - \--retry-iso - \--no-retry-isolated If true then any job retries will be done in isolation (as though -j1 was set) - \--run-id - \--id - \--no-run-id Set a specific run-id. (Default: a UUID) - \--test-args ARG - \--test-args=ARG - \--no-test-args Arguments to pass in as `@ARGV` for all tests that are run. These can be provided easier using the '::' argument separator. Can be specified multiple times - \--stream - \--no-stream Use the stream formatter (default is on) - \--tap - \--TAP - \----no-stream - \--no-tap The TAP format is lossy and clunky. Test2::Harness normally uses a newer streaming format to receive test results. There are old/legacy tests where this causes problems, in which case setting --TAP or --no-stream can help. *YathUI Options* - \--yathui-api-key ARG - \--yathui-api-key=ARG - \--no-yathui-api-key Yath-UI API key. This is not necessary if your Yath-UI instance is set to single-user - \--yathui-coverage - \--no-yathui-coverage Poll coverage data from Yath-UI to determine what tests should be run for changed files - \--yathui-db - \--no-yathui-db Add the YathUI DB renderer in addition to other renderers - \--yathui-durations - \--no-yathui-durations Poll duration data from Yath-UI to help order tests efficiently - \--yathui-grace - \--no-yathui-grace If yath cannot connect to yath-ui it normally throws an error, use this to make it fail gracefully. You get a warning, but things keep going. - \--yathui-long-duration 10 - \--no-yathui-long-duration Minimum duration length (seconds) before a test goes from MEDIUM to LONG - \--yathui-medium-duration 5 - \--no-yathui-medium-duration Minimum duration length (seconds) before a test goes from SHORT to MEDIUM - \--yathui-mode summary - \--yathui-mode qvf - \--yathui-mode qvfd - \--yathui-mode complete - \--no-yathui-mode Set the upload mode (default 'qvfd') - \--yathui-only - \--no-yathui-only Only use the YathUI renderer - \--yathui-only-db - \--no-yathui-only-db Only use the YathUI DB renderer - \--yathui-port 8080 - \--no-yathui-port Port to use when running a local server - \--yathui-port-command get\_port.sh - \--yathui-port-command get\_port.sh --pid $$ - \--no-yathui-port-command Use a command to get a port number. "$$" will be replaced with the PID of the yath process - \--yathui-project ARG - \--yathui-project=ARG - \--no-yathui-project The Yath-UI project for your test results - \--yathui-render - \--no-yathui-render Add the YathUI renderer in addition to other renderers - \--yathui-resources - \--yathui-resources=5 - \--no-yathui-resources Send resource info (for supported resources) to yathui at the specified interval in seconds (5 if not specified) - \--yathui-retry - \--no-yathui-retry How many times to try an operation before giving up Can be specified multiple times - \--yathui-schema PostgreSQL - \--yathui-schema MySQL - \--yathui-schema MySQL56 - \--no-yathui-schema What type of DB/schema to use when using a temporary database - \--yathui-upload - \--no-yathui-upload Upload the log to Yath-UI - \--yathui-url http://my-yath-ui.com/... - \--uri http://my-yath-ui.com/... - \--no-yathui-url Yath-UI url - \--yathui-user ARG - \--yathui-user=ARG - \--no-yathui-user Username to attach to the data sent to the db - \--yathui-db-buffering none - \--yathui-db-buffering job - \--yathui-db-buffering diag - \--yathui-db-buffering run - \--no-yathui-db-buffering Type of buffering to use, if "none" then events are written to the db one at a time, which is SLOW - \--yathui-db-config ARG - \--yathui-db-config=ARG - \--no-yathui-db-config Module that implements 'MODULE-\>yath\_ui\_config(%params)' which should return a Test2::Harness::UI::Config instance. - \--yathui-db-coverage - \--no-yathui-db-coverage Pull coverage data directly from the database (default: off) - \--yathui-db-driver Pg - \--yathui-db-drivermysql - \--yathui-db-driverMariaDB - \--no-yathui-db-driver DBI Driver to use - \--yathui-db-dsn ARG - \--yathui-db-dsn=ARG - \--no-yathui-db-dsn DSN to use when connecting to the db - \--yathui-db-duration-limit ARG - \--yathui-db-duration-limit=ARG - \--no-yathui-db-duration-limit Limit the number of runs to look at for durations data (default: 10) - \--yathui-db-durations - \--no-yathui-db-durations Pull duration data directly from the database (default: off) - \--yathui-db-flush-interval 2 - \--yathui-db-flush-interval 1.5 - \--no-yathui-db-flush-interval When buffering DB writes, force a flush when an event is recieved at least N seconds after the last flush. - \--yathui-db-host ARG - \--yathui-db-host=ARG - \--no-yathui-db-host hostname to use when connecting to the db - \--yathui-db-name ARG - \--yathui-db-name=ARG - \--no-yathui-db-name Name of the database to use for yathui - \--yathui-db-pass ARG - \--yathui-db-pass=ARG - \--no-yathui-db-pass Password to use when connecting to the db - \--yathui-db-port ARG - \--yathui-db-port=ARG - \--no-yathui-db-port port to use when connecting to the db - \--yathui-db-publisher ARG - \--yathui-db-publisher=ARG - \--no-yathui-db-publisher When using coverage or duration data, only use data uploaded by this user - \--yathui-db-socket ARG - \--yathui-db-socket=ARG - \--no-yathui-db-socket socket to use when connecting to the db - \--yathui-db-user ARG - \--yathui-db-user=ARG - \--no-yathui-db-user Username to use when connecting to the db *NO CATEGORY - FIX ME* - \--check-reload-state - \--no-check-reload-state Abort the run if there are unfixes reload errors and show a confirmation dialogue for unfixed reload warnings. ## SOURCE The source code repository for Test2-Harness can be found at *http://github.com/Test-More/Test2-Harness/*. ## MAINTAINERS - Chad Granum \ ## AUTHORS - Chad Granum \ ## COPYRIGHT Copyright 2025 Chad Granum \. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. See *http://dev.perl.org/licenses/*